Industrial PVC pipe extrusion production equipment

NegotiableUpdate on 01/12

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Industrial PVC pipe extrusion production equipment is used to produce various diameters and wall thicknesses of plastic PVC pipes for agricultural water supply and drainage, building water supply and drainage, cable laying, and other aspects

Product Details

　　Industrial PVC pipe extrusion production equipmentFeatures:

1. The pipe equipment production line is designed with spiral die heads for HDPE and PP large-diameter thick walled pipes. This die head has the characteristics of low melt temperature, good mixing performance, low mold cavity pressure, and stable production.

2. The pipe equipment production line adopts proprietary technology for sizing and cooling systems, using water film lubrication and water ring cooling to meet the requirements of HDPE and PP materials, ensuring stable diameter and roundness for high-speed production of thick walled pipes.

3. The pipe equipment production line adopts a specially designed multi-stage vacuum sizing box to control the vacuum degree, ensuring the dimensional stability and roundness of HDPE and PP pipes The extruder and tractor are controlled by imported speed controllers, which have good stability, high precision, and high reliability.

4. The operation and time of the pipe equipment production line are programmed and controlled by PLC, with a good human-machine interface. All process parameters can be set and displayed through the touch screen Special extruders for assembly marking lines can be used to produce pipes with colored markings that meet national standards.

　　Notes:

1. The extruder should run forward to avoid reverse rotation.

2. Never operate on an empty stomach. It is necessary to operate with a hot machine and feed to avoid sticking to the shaft.

3. It is strictly prohibited for iron tools and other miscellaneous items to enter the feed inlet and vent hole of the extruder to avoid accidents and affect production.

4. Safe use of electricity and grounding wire.

5. During machine operation, it is prohibited to touch rotating parts such as the feed inlet, discharge outlet, belt, and gear with hands.

6. Lubricating oil should be injected before using the machine to avoid damage.

　Cleaning of industrial PVC pipe extrusion production equipment

1. Before cleaning, turn off the power first and wait for the extruder to cool to room temperature.

2. Use detergent and clean water for cleaning, be careful not to let water flow into the interior of the machine.

3. The concentration of the cleaning solution should be controlled at around 3%, and the operating temperature should be between 50 ℃ and 60 ℃.

4. The cleaning time should be determined according to the frequency of use and the usage environment. Generally, a deep cleaning should be carried out every 3 months.

After rinsing, the machine should be dried using an electric fan.