Automatic PVC plastic crushing equipment

NegotiableUpdate on 01/12

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The automatic PVC plastic crushing equipment has a beautiful appearance, easy operation, and is stable and reliable. The large-diameter plastic pipe crusher is designed for the recycling of large-diameter PVC plastic hard pipes. The scheme is reasonable, the structure is simple, and the operation is effortless without the need for lifting equipment.

Product Details

　　Automatic PVC plastic crushing equipmentStructural characteristics description:

1. The machine design is reasonable, and the body is made of welded steel.

2. Tighten with high-strength screws, the structure is solid and durable.

3. The machine design is exquisite, and the crushed materials are separated to achieve higher output.

4. The output of the sheet material is uniform with minimal loss. Multiple screens can be replaced simultaneously to meet different needs.

5. Equipped with knives of different materials, the knives can be adjusted and retracted according to different materials, and can be ground after blunt use. They can be used multiple times and have a long service life.

6. The machine has the advantages of advanced structure, beautiful appearance, easy operation, stable operation, low investment, and high efficiency.

7. Adding a larger pulley increases the inertia of the crusher, which can save energy and provide powerful crushing.

　　Automatic PVC plastic crushing equipmentMaintenance:

1. The plastic crusher should be placed in a ventilated position to ensure the heat dissipation of the motor during operation and extend its lifespan

2. Lubricating oil should be regularly added to the bearings to ensure lubrication between them

3. Regularly check the screws of the cutting tools. After using the brand new plastic crusher for 1 hour, use tools to tighten the screws of the moving and fixed knives, and strengthen the fixation between the blades and the knife holder

4. To ensure the sharpness of the cutting edge of the tool, it is necessary to regularly inspect the tool to ensure its sharpness and reduce unnecessary damage to other components caused by blunt or missing blade edges

5. When replacing cutting tools, the gap between the moving and fixed blades should be 0.8mm for crushers above 20HP and 0.5mm for crushers below 20HP The thinner the recycled material, the larger the gap can be adjusted appropriately

6. Before starting the plastic crusher for the second time, the remaining debris in the machine room should be cleared to reduce the starting resistance The inertia cover and pulley cover should be opened regularly to remove the ash outlet under the flange, as the powder discharged from the plastic crusher chamber enters the shaft bearing

7. The machine should be well grounded

8. Regularly check whether the plastic crusher belt is loose and tighten it in a timely manner

operating steps

1. Place the plastic shredder on a stable ground and connect the power cord;

2. Ensure that there are no debris inside the shredder, and then turn on the power;

3. Open the feeding port and put the plastic to be crushed into the shredder;

4. After the crushing is completed, turn off the feeding port and power supply;

5. Clean the residue inside the machine.