High precision plastic cutting equipment

NegotiableUpdate on 01/12

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

High precision plastic cutting equipment: The power shaft is supported by a gantry type. High processing precision ensures the rotational accuracy and smoothness of the power, keeping the outer runout of the moving tool within 0.03mm, and making disassembly and installation easy. The cylinder action is controlled by an electromagnetic valve, with a high degree of automation and low noise.

Product Details

　　High precision plastic cutting equipmentFeatures:

1. Due to the fact that plastics are scraped off by blades in a molten state and solidified after cooling with circulating water, this granulation form can be used for polymers of different viscosities. In the molten state, granulation does not form any dust, and the shape of the pellets is regular, making packaging and transportation relatively convenient;

2. Automatically match and adjust the output and cutting speed of the die according to the extrusion volume to change the size of the cut particles, or manually use different blade holders with different blade numbers to change the size and shape of the cut particles;

3. Integrating grain cutting and cooling eliminates the need for a 4-6mm long cold water tank, greatly reducing the footprint;

4. The granulation process achieves automation, easy operation, low noise, and good slicing quality.

5. It has a higher yield and lower energy consumption than traditional strip cutting.

　　Maintenance of high-precision plastic cutting equipment:

1. Maintain the integrity and cleanliness of the granulator, and promptly clean up the dust and scattered granules from the granulator;

2. Check the operation of the pelletizer at any time, paying attention to any abnormal sound or blockage during pelletizing;

3. Timely remove clumps from the strip material to prevent large chunks from entering the granulator;

4. Strictly prevent foreign objects such as metals from entering the granulator;

5. When starting to pull the strip, first introduce a small amount and remove the head lumps. When producing high impact resistant products, the number of pull strips should not exceed 5, and a single adhesive strip should be introduced later;

check

Before operation, a comprehensive inspection of the equipment should be carried out to check whether the blades are normal, whether the cutting area is clean, and whether the transmission system and lubrication system are operating normally.

2. Regularly check the status of equipment, especially electrical systems, to ensure the equipment's operational capability and safety.

3. Pay attention to inspecting and maintaining the cutting tools of the equipment, grinding off the worn parts of the double-sided knife, etc., to ensure cutting effect and efficiency.