Single sealed external suction compression packaging machine

NegotiableUpdate on 01/17

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The single sealed external suction compression packaging machine is used as a vacuum packaging sealing equipment for composite film three-dimensional bags and flat bags. It adopts a chamber free air nozzle mechanism, which is not limited by the size of the vacuum chamber and has a wide range of applications.

Product Details

　　Single sealed external suction compression packaging machineUsage characteristics:

1. This machine is mainly used for heat sealing composite film packaging bags with polyolefin (such as polyethylene, polypropylene, etc.) as the inner layer.

2. The thickness of the film and the width of the seal can be applied within the specified range, and both can achieve uniform linear sealing.

3. Regardless of whether it is a large bag, a small bag, a long bag, or a short bag, continuous linear sealing can be performed to achieve satisfactory results.

4. Equipped with clamps, it can be installed on any side cover of the machine and the angle position can be adjusted to adapt to the convenience of operation.

Application scope:

1. Used for vacuum packaging of fabrics, cotton and wool products to compress packaging volume and save logistics costs.

2. Used for vacuum packaging of various electronic products (semiconductors, circuit boards, electronic finished products, etc.) and machined metal parts to prevent moisture, oxidation, and discoloration.

3. Used for vacuum packaging of seafood, fruits, tea, salted items, soy products, etc. in food to prevent oxidation and spoilage, and extend shelf life

　Operation steps of single sealed external suction compression packaging machine:

1. Connect power: Turn on the power selection switch as needed, and the power indicator light will turn on The power selection switch points to vacuum for vacuum sealing and points to vacuum inflation for vacuum inflation sealing.

2. Place the plastic bag containing the items inside the vacuum chamber, with the bag opening neatly placed on the heat seal (if used for inflatable packaging, at least one nozzle should be inserted into the bag opening).

3. Press down the hood,Vacuum pillow packaging machineThe vacuum indicator light on the panel lights up, and the vacuum pump starts pumping. The hood is automatically sucked in, and the vacuum knob can adjust the vacuum level according to packaging requirements. When adjusting, the amplitude should be small depending on the scale from low to high.

4. When the pumping reaches the set time (i.e. the required vacuum degree), the pumping ends, the pumping indicator light goes out, and the inflation indicator light lights up to indicate the start of inflation. The inflation knob can adjust the length of inflation time (i.e. the amount of inflation), using the same method as above; If inflation is not required, turn the power switch to the vacuum position, the program will automatically enter the vacuum packaging, and the inflation indicator light will turn off