Heat shrink fully automatic packaging machine

NegotiableUpdate on 01/17

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The heat shrink fully automatic packaging machine is suitable for various shrink films and meets various packaging forms. The packaged items can be sealed, moisture-proof, and pollution proof, and protect the goods from external impacts, with a certain degree of cushioning, especially when packaging fragile items, it can prevent the containers from shattering and scattering. In addition, it can reduce the possibility of the product being dismantled or stolen.

Product Details

　　Heat shrink fully automatic packaging machineInstallation:

1. The heat shrink packaging machine, like the winding machine, consumes a lot of power, so the input power must be greater than the nominal power on the shrink machine, otherwise it is easy to burn out the circuit or electrical components.

2. Like a packaging machine, the machine must be reliably grounded to protect personal safety.

3. Each machine is equipped with a power cable when it leaves the factory, and the end lead part has the identification symbol of the power supply. It must be connected correctly, and unauthorized operation may result in electric shock.

4. When the machine specifies a three-phase 380V power supply, the neutral wire must be input at the same time, which is similar to other packaging equipment in the standard three-phase four wire system, such as vacuum packaging machines. Otherwise, the machine cannot function properly and is prone to burning out internal electrical components.

5. The machine must be installed horizontally, otherwise it will shorten the service life of the electric heating tube. For machines with conveyor belts, their inclined installation will cause the conveyor belt to deviate from the center.

6. When the machine is used continuously for more than three months, the temperature resistant wires in the contraction chamber should be inspected and replaced according to their degree of aging.

7. When the machine is working, the operator's palms and other parts are not allowed to come into contact with the operating parts of the machine, especially the temperature inside the contraction chamber, which can easily cause burns.

8. After the packaging work is completed, the heating switch should be turned off first, and the conveyor motor and fan motor should continue to run for about 10 minutes before cutting off the entire power supply.

　　Heat shrink fully automatic packaging machineclean

1. After shutdown, the measuring part should be cleaned in a timely manner, and the feeding tray and turntable should be cleaned every shift to prevent corrosion.

2. For the heat sealer body, it should be cleaned regularly to ensure clear texture of the seal.

3. The photoelectric tracking head, also known as the electric eye, should be cleaned regularly to ensure small errors in cursor tracking.

4. The scattered materials on the material tray need to be cleaned up in a timely manner to keep the parts clean.

5. Regularly clean the dust inside the electrical control box to prevent malfunctions such as poor contact.