Portable pneumatic composite sealing machine

NegotiableUpdate on 01/17

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The portable pneumatic composite sealing machine is suitable for industries such as soil storage, packaging and export, cultural relic preservation, scientific research departments, food, daily chemical industry, factories and shops.

Product Details

　　Portable pneumatic composite sealing machineUse safety measures

1. Maintain the cleanliness of the machine's operating environment and avoid excessively humid conditions.

2. Do not use this product in harsh environments such as flammable and explosive.

3. Three phase four wire machines should be equipped with sockets of the same type as the machine power supply, and should meet the requirements of the three-phase four wire power supply; Single phase machines should be equipped with three pole power sockets and ensure reliable grounding of the machine.

4. When repairing the machine, the power plug should be unplugged to prevent electric shock.

5. Maintain optimal cleanliness of the vacuum chamber and regularly wipe the interior of the machine. The oil for the vacuum pump should only be added to two-thirds of the vacuum pump oil window And strictly follow the instructions for using and maintaining the vacuum pump.

　　Portable pneumatic composite sealing machineNotes:

1. Place the sealing machine on a flat and sturdy ground or platform as required, and remember to use it in a well ventilated environment without corrosive gases.

2. Check if the power supply voltage matches the displayed value of the device, and ensure that the socket is well grounded to ensure electrical safety.

3. Choosing plastic film or plastic composite film with high airtightness as packaging bags can ensure good sealing effect.

4. The appropriate sealing temperature needs to be adjusted according to the material, thickness, size, etc. of the packaging material.

5. Be careful not to disassemble machine parts randomly to avoid damaging internal components of the machine.

6. The amplitude of the knob for adjusting the sealing time should be small, from low to high, to avoid burning the PTFE cloth due to excessive heat sealing temperature.

7. The material in the bag should not be too much, and there should be appropriate space at the bag opening to facilitate a secure seal.

8. Before sealing, the main opening of the bag should be checked for neatness, and after packaging, the sealing should be checked for firmness when the cold zone of the bag reaches room temperature.