-
E-mail
webmaster@rxjd.com
-
Phone
13801568566
-
Address
China
Product Categories
Zhangjiagang Rixin Electromechanical Co., Ltd
Multi layer automatic circular vibrating screen
NegotiableUpdate on 01/12
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
Features of multi-layer automatic circular vibrating screen: 1. High efficiency, exquisite and durable design. 2. Easy to change the network, simple to operate, and easy to clean. 3. Impurities and coarse materials are automatically discharged, allowing for automated operations. 4. Easy maintenance without mechanical action, can be used in single or multiple layers. 5. The parts in contact with the raw materials are made of stainless steel.
Product Details
Multi layer automatic circular vibrating screenPerformance characteristics:
1. The circular vibrating screen adopts a cylindrical eccentric shaft exciter and a bias block to adjust the amplitude, which is easy to use and maintain;
2. The circular vibrating screen adopts spring steel woven screen or punched screen plate, which has a long service life and is not easy to block the holes;
3. The circular vibrating screen adopts rubber isolation springs, which have long service life, low noise, and smooth passage through the resonance zone.
Details of using a vibrating screen:
1. The operator and sand making machine manufacturer suggest that everyone should have a detailed understanding of the basic structure and working principle of the vibrating screen, and regularly check, summarize experience, and record operating data.
2. Before removing the transport fixing plate, the sand making machine throwing head manufacturer recommends not to turn on the vibration motor. If the fixed plate is not removed before starting, it may cause damage to the equipment, vibration motor, and may result in personal injury.
3. Before each start-up, check whether the screen is tightly pressed, leveled, and whether the tie ring screws are locked.
4. Before each start-up, necessary inspections should be carried out, focusing on checking whether the lubrication is good, whether the connecting parts are loose, and whether there is any jamming between the moving parts. Attention should also be paid to ensuring the necessary clearance between all moving parts and fixed parts. And after working for 8 hours, tighten all the fasteners of the equipment again.
5. Each time the vibrating screen is started, it should be ensured to operate in an unloaded state. After the screen runs smoothly, the machine should be stopped only after the material inside the screen box has been drained.
6. If the vibrating screen experiences abnormal conditions during operation and requires maintenance or routine upkeep, it must be shut down for implementation. Dynamic maintenance or upkeep is strictly prohibited.
7. The manufacturer of the sand making machine throwing head believes that necessary routine maintenance and regular repairs are required after the equipment is put into normal use, especially lubrication of the vibration motor bearings.
Multi layer automatic circular vibrating screenNotes:
1. The operator and sand making machine manufacturer suggest that everyone should have a detailed understanding of the basic structure and working principle of the vibrating screen, and regularly check, summarize experience, and record operating data.
2. Before removing the transport fixing plate, the sand making machine throwing head manufacturer recommends not to turn on the vibration motor. If the fixed plate is not removed before starting, it may cause damage to the equipment, vibration motor, and may result in personal injury.
3. Before each start-up, check whether the screen is tightly pressed, leveled, and whether the tie ring screws are locked.
4. Before each start-up, necessary inspections should be carried out, focusing on checking whether the lubrication is good, whether the connecting parts are loose, and whether there is any jamming between the moving parts. Attention should also be paid to ensuring the necessary clearance between all moving parts and fixed parts. And after working for 8 hours, tighten all the fasteners of the equipment again.
5. Each time the vibrating screen is started, it should be ensured to operate in an unloaded state. After the screen runs smoothly, the machine should be stopped only after the material inside the screen box has been drained.
6. If the vibrating screen experiences abnormal conditions during operation and requires maintenance or routine upkeep, it must be shut down for implementation. Dynamic maintenance or upkeep is strictly prohibited.
7. The manufacturer of the sand making machine throwing head believes that necessary routine maintenance and regular repairs are required after the equipment is put into normal use, especially lubrication of the vibration motor bearings.
