Industrial fully automatic dryer

NegotiableUpdate on 01/12

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The industrial fully automatic dryer has a large dehumidification capacity and high efficiency; Easy to operate, reliable and stable in operation; The device has a small size and is easy to install;

Product Details

　　Industrial fully automatic dryerAdvantage:

1. Uniform distribution of hot air: A high-performance hot air diffusion device with uniformly dispersed hot air is used to maintain uniform drying temperature of plastics, increase drying efficiency, and shorten drying time.

2. Accurate temperature control: Using a high-precision temperature regulator, the temperature can be precisely controlled, and using a ratio based deviation index thermometer, temperature errors can be eliminated.

3. Save time and manpower: The body and base are designed to be separated, making material cleaning convenient and easy, and material replacement simple and fast.

4. Reliability design: The equipment has a beautiful and sturdy appearance, easy installation, multiple safety devices, and ensures work safety.

5. Double overheat protection device: can reduce accidents caused by human or mechanical failures.

　　Precautions for Industrial Fully Automatic Drying Machine:

1. Confirm that the dehumidification dryer has been installed and adjusted;

2. Turn on the power switch on the control box power supply and dehumidifier panel;

3. Regularly check the temperature indication of the material bucket, and repair it promptly if any faults are found;

4. When the temperature rises to a certain level, check if it is consistent with the temperature of the lower part;

5. During production, the material bucket should always be kept at 8 points full;

6. The raw materials must reach a sufficient drying time before production can begin;

7. When the drying is completed and the machine needs to be stopped, first turn off the feeding plate, extract the raw materials below, and then turn off the feeding system.

　　Precautions for use

1: The inlet and outlet of the dehumidification dryer should not have any obstacles, and the air filter should be kept clean;

2: When using a dehumidification dryer, close the doors and windows to achieve the best dehumidification effect;

3: The dehumidification dryer should be placed flat and should not be tilted or tilted horizontally;

4: When the ambient temperature exceeds 40 degrees, the circuit of the overload protector should be cut off to avoid damage to the compressor motor;

5: Due to the fact that the dehumidifier takes 4-6 hours for the cold coal to return to its original position after transportation, it should be stopped for 4-6 hours before starting the dehumidifier;

6: When it is necessary to move the machine during operation, the power cord plug should be unplugged first, then the water in the water storage tank should be emptied and the air filter should be cleaned regularly to ensure the dryness and dehumidification life of the dehumidifier;

7: The water temperature for cleaning the air filter should be below 40 degrees Celsius, and it is better to use a cleaning agent for cleaning;

8: When cleaning the body, simply wipe it with a damp cloth to prevent splashing water and damaging the electrical insulation;

9: There are sticky substances on the outside of the body, which can be cleaned with soapy water to prevent them from being removed with gasoline or solvents, and to avoid paint peeling or discoloration.