Industrial plastic shearing shredder

NegotiableUpdate on 01/12

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Plastic shearing shredder with dual axis low speed, high torque, large processing capacity, and wide application range; Modular design of the entire machine for easy maintenance and replacement

Product Details

industryCharacteristics of plastic shearing shredder

1. Dual axis low-speed, high torque, large processing capacity, wide application range

2. Modular design of the entire machine for easy maintenance and replacement

3. The blade and gasket are made of special alloy steel with high hardness and wear resistance imported from abroad, and the surface is heat-treated to have cutting performance. Titanium plating treatment technology can be chosen to increase the hardness, wear resistance, and corrosion resistance of the blade, and extend its service life by 1.5-2 times

4. The shaft and blade are combined in a spline structure, which transmits high torque and is not easily deformed, making it easy to disassemble and repair

5. The motor and reducer ensure the stability of the power system

6. The bearing seat adopts a combination and easy disassembly type, which can be quickly disassembled.

The sealing structure of 7. * effectively blocks broken materials from entering the gearbox, and can also protect bearings and gears when handling liquid materials

8. Multiple protection system: Multiple intelligent protections for mechanical and electrical equipment, including main motor start protection, motor jamming overload protection, automatic reverse protection, etc

　　industrial plasticsShear shredderPrecautions

1. Before using the double axis shredder equipment, it is necessary to stabilize the equipment and power facilities and strictly prohibit external leakage and rain exposure.

2. Check if the screws at the joint are loose. If any looseness is found, tighten them promptly and pay more attention. If any looseness is found, tighten them immediately.

3. Pay attention to checking the wear and tear of vulnerable parts. If the wear is severe, it should be replaced in a timely manner to avoid damaging the main components, and necessary fire prevention measures should be taken.

4. Uniform feeding is required, and the material should not fill the crushing chamber. The maximum feeding standard should not exceed 0.85 times the width of the feeding port. When feeding together, non shredded materials should be prevented from entering the shredder.

5. During the shift handover of the dual axis shredder, special attention should be paid to discharging the remaining material * in the shredder chamber before turning off the machine.