-
E-mail
etite@sina.com
-
Phone
18939778618
-
Address
Building 7, No. 38 Beiguandu Road, Wuzhong District, Suzhou City
Product Categories
Suzhou Yidete Machinery Co., Ltd
Industrial plastic mold scale cleaning equipment
NegotiableUpdate on 01/12
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
The working principle of industrial plastic mold scale cleaning equipment is to add high compressed air to the high-speed cleaning solution, and use the occurrence of "cavitation" phenomenon in the pipeline to impact and blast the attachments and pollutants on the pipe wall. The high-speed water flow carries away the scale that has been cleaned in the pipeline.
Product Details
Industrial plastic mold scale cleaning equipmentfunction
1. Easy to use and movable.
2. Online and mold cleaning, convenient for mold maintenance.
3. Multiple alarm protections ensure stable operation of the machine.
4. The automatic mold cleaning function ensures that there is no water in the mold water channel.
5. The fixed effect of the inner wall of the waterway prevents corrosion and extends the service life of the mold.
6. After cleaning, the thermal conductivity of the mold remains stable, and temperature management of the mold is easy to implement.
Industrial plastic mold scale cleaning equipmentMaintenance and upkeep:
1. Daily cleaning and cleaning
1) Cleaning of dust on the surface of the mold: After wiping with a clean cloth, touch the surface of the mold with your hand. If you do not feel any dust, it is qualified.
2) Cleaning of mold guide sleeve and guide column: Use a cloth to wipe off the accumulated oil blocks in the guide sleeve, guide column, and guide block areas, and then apply a small amount of oil for lubrication
3) Cleaning of punching area: Use a hammer to remove all the waste inside the hole, as well as the waste adhered to the sliding plate and the debris from cutting at the cutting edge.
4) Molds with coatings must have their stretched surfaces cleaned, and the smoothness of the surface must be confirmed by hand. The first material used during production must be wiped clean with a cloth, and after production, a small amount of oil must be applied to the mold.
2. Regular cleaning and cleansing
1) After mold maintenance, the surface of the mold must be cleaned thoroughly.
2) Every once in a while, the mold must be completely disassembled and then all products must be cleaned.
3) During regular maintenance, clean and tidy the outer surface of the mold, as well as the disassembled and replaced parts
4) Before installing the mold, the upper and lower surfaces of the mold should be cleaned to ensure that the installation surface of the mold and the worktable of the press are not damaged by pressure and the parallelism of the upper and lower installation surfaces of the mold during production.
5) After the mold is installed, open the mold and clean all parts of the mold, especially the guiding mechanism. For surface part molds, the surface should be cleaned to ensure the quality of the parts.
