Fully automatic self dumping centrifuge

NegotiableUpdate on 01/12

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The overall rotating mechanism of the fully automatic self dumping centrifuge can be enclosed within the shell, making it easy to achieve sealing and explosion prevention; Simple structure, easy operation and maintenance, low cost, and easy operation;

Product Details

　　Fully automatic self dumping centrifugeFeatures:1. Simple structure, easy operation and maintenance, low cost, and easy operation;

2. Elastic suspension structure, automatic centering, smooth operation;

3. The overall rotating mechanism can be enclosed within the shell, facilitating sealing and explosion prevention;

4. Intermittent operation, cyclic operation, inability to separate continuously, low production capacity, and high labor intensity for workers;

5. Very little damage is caused to solid particles, especially for manual discharge type, which has little damage to particles;

6. The operating cycle can be freely adjusted, and the washing and drying effect is good;

7. Strong applicability, it can be used for adding materials while driving, adding materials before driving, and also suitable for the dehydration of finished products

　　Fully automatic self dumping centrifugeNotes:

1. When testing the plastic centrifuge, please recognize the machine's direction of rotation and ground the wire.

2. Workers should be careful not to insert their hands into the high-speed rotating machine, and the plastic centrifuge motor pulley should not come into contact with their body or clothing during operation.

3. Firstly, start the motor. The material is fed into the upper inlet, and the plastic centrifuge automatically discharges from the lateral outlet. The water is discharged from the drainage outlet.

4. Be careful not to block the discharge port, for example, if the bag is directly connected, remove the bag immediately when it is full. If the material is blocked for too long, it may burn the motor.

5. Before changing materials or leaving work, a bucket of water can be flushed into the feeding port while the machine is running. There is a cleaning port next to the machine that can be opened for cleaning. The plastic centrifuge machine has an oil cup on the side that can be refilled with one cup of engine oil every month.

6. The plastic centrifuge is randomly equipped with a spare set of knives and screws and nuts. When the wear and tear of the fixed knife in the machine becomes shorter after prolonged use, it can be installed. When the machine vibrates or the discharge is not dry, it can be installed. The installation of the knife should be based on not grinding the inner bucket.