Project Description
DDSJ300X2 Baoji Avenue double-layer dual color chemical drum blow molding machine can produce 220L single and double L ring drums
DDSJ300X2 is a double-layer plastic blow molding machine with a storage tank developed by Da Dao Company.
Used for blowing double-layer two-color 200L/220L single and double L ring plastic chemical drums.
Taking this 220L chemical drum as an example
weight：10.25kg/pcs
production capacity：≥20pcs/hour
The product slices have uniform dual color and online appearance!
Drop test resistant and pressure resistant, with visible quality!
The extruder adopts IKV structure
High output, good plasticization quality!
Double layer storage mold head, nitride hardness ≥ HV900
The molding machine adopts a four bar structure
Servo control of mold opening and closing speed
Smooth and fast operation, with high locking pressure
The molding machine can be removed using a ratchet wrench,
The spacing between the upper guide columns is large, which facilitates the lifting of the mold from the upper end of the molding machine.
The electrical system is controlled by Omron PLC from Japan
64 point axial wall thickness control system
The touch screen displays rich content, including full screen display of setting curves, operating parameters, fault alarms, etc.
The separation of the main oil tank and servo cylinder oil tank reduces the frequency of oil changes
Main oil tank servo oil pump control, low motor power, energy-saving, low oil temperature
The servo cylinder hydraulic system adopts unloading relief valve and Shanghai 704 Research Institute servo valve (or MOOG valve)
Detailed information:
220L double-layer dual color dual L ring drum produced by Da Dao blow molding machine
220L double-layer dual color dual L ring drum - produced by Da Dao blow molding machine
Chemical drum three-layer description
Trial production of Avenue 220L double-layer chemical drum blow molding machine before shipment
Trial production of Avenue 220L double-layer chemical drum blow molding machine before shipment
Trial production of Avenue 220L double-layer chemical drum blow molding machine before shipment
DDSJ300X2 machine head
DDSJ300X2 bucket mold for Da Dao
DDSJ300X2 bucket mold for Da Dao
Product Parameters:
| DDSJ300X2 Two-layer Co-extrusion Blow Molding Machine DDSJ300X2 double-layer co extrusion hollow blow molding machine |
|||||
| configuration Components |
serial number No. |
Name/Description |
Aouter layer Outer Layer |
Binner layer Inner Layer |
unit Unit |
| extruder Extruder |
1 | 螺杆直径 Screw Dia. | 90 | 90 | mm |
| 2 | Length to diameter ratio L/D ratio | 30 | 30 | / | |
| 3 | Screw speed Speed | 0~75 | 0~75 | rpm | |
| 4 | Plasticization ability (granular material) Plasticizing Capacity Granular material |
180 | 180 | kg/h | |
| 5 | DC motor driving power DC Motor Drive Power |
75 | 75 | KW | |
| 6 | Heating Power | 20 | 20 | KW | |
| die head Die Head |
7 | Accumulator Capacity for Material Storage | 22 | L | |
| 8 | Maximum weight of raw material. Parison Weight | 16.5 | kgs | ||
| 9 | Injection rate | 1.25 | kg/sec. | ||
| 10 | Parison Thickness Control Point | 64 | / | ||
| 11 | 口模直径 Die Lip Dia. | 200~350 | mm | ||
| 12 | Maximum Product Volume | 230 | L | ||
| 13 | Heating Power | 38 | KW | ||
| Mold closing and inflation mechanism Clamping &Blow Unit |
14 | Template size (width X height) Platen Size WxH | 1910×1350 | mm | |
| 15 | Template spacing | 1000-1900 | mm | ||
| 16 | Clamping Force | 800 | KN | ||
| 17 | Die Open Close Speed | 0-12 | m/min | ||
| 18 | Extension stroke | 320 | mm | ||
| 19 | Needle Expansion Stroke | 240 | mm | ||
| pneumatic system Pneumatic system |
20 | Pressure (provided by the user) Pressure (End User Provide) |
0.3~0.8 | MPa | |
| hydraulic system hydraulic system |
21 | Pressure of the servo cylinder hydraulic system | 14 | Mpa | |
| 22 | Power of the Servo Cylinder Hydraulic System (Servo Oil Pump) | 5.5 | KW | ||
| 23 | Main hydraulic system pressure Main Hydraulic system Pressure |
16 | Mpa | ||
| 24 | Main hydraulic system power Main Hydraulic system Power |
15 | KW | ||
| compressed air (User provided) Compressed Air （End User Supply） |
25 | Pressure | 1 | Mpa | |
| 26 | Temperature | 10 | ℃ | ||
| 27 | Consumption Discharge | 30 | m³/h | ||
| cooling water (User provided) Chilling Water （End User Supply） |
28 | Pressure | 0.2 | Mpa | |
| 29 | Temperature | 10 | ℃ | ||
| 30 | Consumption | 30 | m³/h | ||
| 31 | Installed Capacity | 248 | KVA | ||
| 32 | Average Energy Consumption | ~100 | KW/h | ||
| Production capacity, taking 220L round barrel as an example, based on productivity on 220L round barrel | 20~22 | pcs/h | |||
Related products:
DDSJ50 storage type hollow forming machine
DDSJ50 storage type hollow forming machine
DDSJ1000 Avenue single-layer 1000lL IBC ton drum blow molding machine
DDSJ1000 Avenue single-layer 1000lL IBC ton drum blow molding machine
DDSJ300A Avenue single-layer chemical drum blow molding machine, with a product capacity of 300L
DDSJ300A Avenue single-layer chemical drum blow molding machine, with a product capacity of 300L
DDSJ300X2A Avenue double-layer fuel tank blow molding machine, with a product capacity of 300L
DDSJ300X2A Avenue double-layer fuel tank blow molding machine, with a product capacity of 300L
DDSJ300X2 Baoji Avenue double-layer dual color chemical drum blow molding machine
DDSJ300X2 Baoji Avenue double-layer dual color chemical drum blow molding machine
