SZ fluoroplastic centrifugal pump

SZ fluoroplastic centrifugal pump

Model meaning
SZ50-32-160
SZ represents fluoroplastic centrifugal pump
50 represents the imported caliber
32 represents the export caliber
160 represents the nominal diameter of the impeller

structural characteristics
·SZ series pumpFor a single impeller centrifugal pump, its axial direction is the suction port and the radial direction is the discharge port.
·The structure is simple, and the pump shaft and impeller are directly connected.
·Easy to connect, both the inlet and outlet are standard flange connections.
·The overcurrent components of the pump are made of fluoroplastics (F26, F46), and the auxiliary parts are made of castings (HT200).

Typical Applications
·Any concentration of strong corrosive media such as acid, alkali, salt solution, strong oxidant, organic solvent, etc.
·Industries such as petroleum, chemical, pesticide, acid washing, dyeing, papermaking, electroplating, etc.

Operating conditions
·A thin medium without solid particles or fibers;
·Medium temperature: -20 ℃~120 ℃;
·The maximum medium density is 1.35 × 103kg/m3;
·The highest temperature in the environment is+40 ℃;
·The highest sea level is 1000m;
·The maximum pressure of the system is 10 bar.

motor
·The motor is a fully enclosed, air-cooled bipolar motor;
·Protection level: IP55;
·Insulation grade: F;
·Standard voltage: 50Hz, 3 × 380V