MMSED magnetic coagulation process package manufacturer

Magnetic coagulation complete equipmentThe main technical advantages are as follows:

(1) The total residence time of this process is within 30 minutes, and the footprint is about 20% of that of a conventional coagulation sedimentation tank. High processing efficiency, with a removal rate of 90% for SS and TP, and effluent values of<5mg>

(2) By combining the coagulation and flocculation reaction tank with the sedimentation tank, and due to the absence of any directional flow disturbance during the sedimentation process, the sedimentation residence time can be further reduced to 5-10 minutes. Therefore, the equipment can occupy about 50% of the continuous flow magnetic coagulation tank and about 20% of the conventional coagulation sedimentation tank, and the compactness of the structure can be further enhanced. The one-time investment cost of new construction or expansion projects can be significantly reduced, while the system operating cost is comparable to the original process.

(3) The coupling process of magnetic coagulation/ultrafiltration is applied to municipal water supply treatment, which will greatly improve treatment efficiency, reduce the footprint of water plants, and achieve excellent effluent quality and high biological safety. In addition, the excellent effluent quality of magnetic coagulation significantly reduces the pollutant load of the membrane system, reduces the frequency of flushing, and can extend the service life of the membrane by 20%, reaching more than 5 years.

(4) The magnetic coagulation/magnetic resin adsorption coupling process is used in municipal water supply to treat organic pollutants and heavy metal ions that are difficult to remove by conventional coagulation and sedimentation processes. This process can reduce the generation of DBPs in the disinfection process and improve the quality of drinking water.

Magnetic coagulation complete equipmentThe upward flow rate design value of the process can reach 20-80m/h, and the entire process can be completed within 30 minutes. Compared with conventional coagulation and sedimentation processes, it can save more than 50% of land area, which will be very beneficial for the space utilization of old or new water plants. The magnetic coagulation process is highly efficient in removing solid particles from water, with a SS removal rate of up to 90%. In addition, it can also remove about 50% of COD and 8% -85% of organic matter in water. The magnetic coagulation process is highly efficient in treating low temperature, low turbidity, and high turbidity water, and has strong resistance to impact loads. Combining magnetic coagulation with UF membrane process will make the water treatment process more stable and efficient, and the treatment unit of the water plant will be more compact. Therefore, the development prospects of the magnetic coagulation process market are promising, with good promotion value in the water treatment industry and a large market capacity. The main markets are:

(1) Domestic sewage treatment: Level A upgrading and transformation, removal of phosphorus from clear liquid in sludge concentration tank;

(2) Industrial wastewater treatment: high phosphorus, high SS primary treatment and biochemical effluent deep treatment, mine water treatment;

(3) Black and odorous river: rapid reduction of SS, TP, COD and other indicators;

(4) Landscape water management: rapid reduction of indicators such as SS, TP, COD, etc;

(5) Domestic drinking water supply treatment: primary treatment, sludge concentration supernatant/filter backwash water recovery.