How much does it cost to sell MBR integrated water treatment equipment

FYMMBR integrated water treatment equipmentAdopting grille+regulating tank+anoxic tank+aerobic tank+digestion liquid reflux+sludge reflux+membrane system+sludge reflux system+clean water tank

When the amount and quality of sewage are unstable, it is necessary to add a regulating tank to mix the sewage evenly in the regulating tank. After mixing evenly, the sewage flows into the integrated sewage treatment equipment, undergoes aeration treatment in the anoxic tank, enters the aerobic tank for aeration treatment, enters the membrane tank for filtration, and is discharged after staying in the clean water tank to meet the standard. The steel plates used are generally 5-10 thick. For small equipment with a length of 5 meters or less, 5 thick steel plates can be used, and for those above, 6mm, 8mm, and 10mm thick steel plates can be used.

FYMMBR integrated water treatment equipmentAdvantage:

1. Compact and small in size, MBR combines the aeration tank and secondary sedimentation tank of traditional sewage treatment into one, replacing all the process facilities of tertiary treatment, thus significantly reducing the footprint

2. High anti pollution graphene film is used to effectively extend the service life of the film.

3. High removal rate of organic pollutants and stable effluent quality;

4. Simple operation, convenient construction, no need for special maintenance, and good self-protection of equipment;

5. Treat the water quality well and meet the discharge standards;

6. The equipment can be flexibly configured according to the quality of raw water, making it widely applicable;

7. Optional buried or above ground structures can be used for greening above the surface.

This process is beneficial for the interception and reproduction of nitrifying bacteria. Due to the very long mud age, the degradation efficiency of difficult to degrade organic matter is greatly improved, and the system has high nitrification efficiency. By changing the operating mode, there can also be ammonia and phosphorus removal functions.

The packing bracket of FYMMBR integrated sewage treatment equipment adopts galvanized threaded steel pipe, which has strong anti-corrosion performance and can be used continuously for 15-20 years. After the sedimentation tank is equipped with a central water distributor, start welding the other side of the vertical plate, and remove rust and paint after welding. After all the internal fillers, aerators, membrane frames, etc. are installed, the top plate is welded and inspection holes are added. After all are completed, the overall structure is painted with three coats of anti-corrosion paint, followed by one coat of topcoat. The equipment is sprayed with words, logos, etc. After the equipment is completed, a water inlet test should be conducted to check for leaks, and a trial operation should be carried out to test the mechanical and electrical equipment and control.