Industrial multifunctional hydraulic rubber cutting machine

NegotiableUpdate on 01/12

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The industrial multifunctional hydraulic rubber cutting machine is suitable for cutting natural rubber and various other plastic materials. It is one of the equipment in rubber factories and is used for cutting small pieces of synthetic rubber in the rubber industry.

Product Details

　　Industrial multifunctional hydraulic rubber cutting machineoperation：

(1) Before operation, carefully check the oil level in the fuel tank, electrical limit switch, transmission device, and hydraulic system to keep the rubber cutting machine intact.

(2) When cutting glue, the raw glue must be placed before starting. After starting, it is necessary to strictly prevent the glue block from popping out and injuring people. It is strictly prohibited to extend hands and feet beyond the cutting knife. When pulling glue, an iron hook must be used.

(3) Check if there are any impurities in the rubber block to be cut to avoid damaging the machine.

(4) Check if the cut natural rubber blocks meet the specified process temperature requirements.

(5) Continuous cutting of glue, cutting of cold, hard raw glue, and debris is prohibited.

(6) When the equipment is running, it is strictly prohibited to cross, crawl or lie down on the conveyor belt for rest.

(7) It is strictly prohibited to insert hands into the lower end of the cutting blade when cutting glue.

(8) When the raw rubber needs to be sorted on the machine, it must be stopped.

(9) The failure of the rubber cutting machine must be dealt with actively, and maintenance during equipment operation is prohibited.

(10) When lining the blade groove, raise the cutting blade and place a wooden block on it before cutting off the power.

(11) When not in use, the cutting blade should be lowered, the power should be cut off, and the area should be tidied up.

　　Industrial multifunctional hydraulic rubber cutting machineNotes:

1. Before driving, check for any debris under the cutter and clean the surrounding floor.

2. The person operating the rubber block should not concentrate and pay attention to the danger of the cutting blade,

3. Before driving, check for any debris under the cutter and clean the surrounding floor.

4. The person operating the rubber block should not concentrate and pay attention to the danger of the cutting blade. When moving the rubber block, it is even more important to prevent slipping and falling under the cutting blade, which may cause personal accidents.

5. When cutting glue, do not exceed the position of the knife to prevent injury from pressure.

6. Always keep the blade sharp and do not cut other objects.

7. After the work is completed, cut off the power in a timely manner.