Fully automatic double cylinder rubber cutting machine

NegotiableUpdate on 01/12

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The fully automatic dual cylinder rubber cutting machine is suitable for cutting natural rubber and various other plastic materials. It is one of the equipment in rubber factories and is used for cutting small pieces of synthetic rubber in the rubber industry.

Product Details

　　Fully automatic double cylinder rubber cutting machineFeatures:

1. The vertical hydraulic rubber cutting machine has a simple structure and reasonable design. Easy to operate.

2. This machine is a single blade hydraulic operation, and the vertical hydraulic rubber cutting machine is mainly composed of a cutting blade, a frame, a hydraulic system, and an electrical system.

3. Large pieces of raw rubber can be cut into small rubber blocks for processing, reducing the huge resistance caused by the plastic mixing of large pieces of raw rubber to the equipment. The plastic mixing speed is fast, saving time, electricity, and effort, extending the life of the rubber mixing equipment, and improving the efficiency of rubber mixing.

　　Fully automatic double cylinder rubber cutting machineMaintenance and upkeep:

1. The oil used in this machine must be strictly filtered before being injected into the oil tank, and the oil level must not be lower than the oil level indicated on the oil gauge.

2. The fuel tank should be cleaned and replaced with new oil every six months, and the replacement time should not exceed three months. The oil can be filtered again and reused.

3. The guide sleeve of the movable crossbeam and the column should be regularly lubricated with oil.

4. Use N46 anti-wear hydraulic oil or N46 low pour point hydraulic oil.

5. The pressure gauge should be checked every six months.

6. When the machine is not in use for a long time, all external leakage machining surfaces should be wiped clean and coated with anti rust oil