Fanuc injection molding machine S50iA maintenance

Fanuc injection molding machine S50iA maintenance

Methods for replacing dry batteries and clearing alarms

1、 Replacement of dry batteries and removal of alarmsLCDThe lower part of the screen displays the alarm for "dry battery" and control device（001）AndAPCWhen the dry battery voltage drop alarm occurs, a new battery should be replaced within one week. Press the reset button to clear the alarm.

★ Dry batteries have2Species: . The control battery is a lithium battery. . The pulse encoder uses alkaline batteries.

When replacing the battery, be sure to switch to the power sourceONAt the same time.

[The function of batteries]： （1）Control battery:NCStorage of data, mold files, etc（2）Encoder battery: MemoryACBehind the position of the motor.

★ If inLCDThe screen displays' battery ', you need to select the self diagnosis screen for confirmation.

After replacing the battery with a new one, the display of "battery" will not disappear. The display will only disappear when the power is cut off and then turned on.

2、 Method for replacing control batteries:

1. ROBOSHOTControl the use of lithium batteries (lithium batteries)A02B—0120—K106）

2. The battery is installed in front of the power supply in the control department

3. ROBOSHOTControl the power supply toON（ROBOSHOTWhen replacing the battery, the control power supply can also beOFFStatus, but to be in30Complete within minutes. If it exceeds30minute,CNCThe stored content may be lost. ）

4Lift up the top and bottom of the battery box on the front panel of the power supply department, move it forward, and remove it.

5Then move forward and remove the power connector.

6Connect the new battery connector to the power source.

7Install the battery box

8Reset(refer to) ROBOSHOTThe battery location

If replacing the system while turning off the power, it is necessaryheelFANUCContact the after-sales service department or Covestro CNC Technology Co., Ltd. To avoid delaying your company's production!

warranty

New products are guaranteed for one year;For all products and projects that we repair or sell (old parts), we offer a three-month full warranty (i.e. we provide warranty for any type of malfunction during the warranty period). In case of special circumstances, we will communicate with you clearly before the repair. Let you understand and consume with peace of mind.

support

When both of us have already understood each other and you have a certain amount of transactions every month, during the maintenance period of your repair products, as long as we have the same model of finished products in stock, we can lend them to you for free until your repair products are repaired; Whether you have worked with us or not, if you have any technical issues, you can consult us for free by phone, and we will do our best to assist you in solving the problem.

contact information

Dongguan Kesichuang CNC Technology Co., Ltd

Phone:/

Fax:

contacts:a weaponMr./

contacts:kingMiss/

Office Address: Guoxin Commercial Building, Yunhe East Third Road, Nancheng, Dongguan City702chamber