Exhaust type automatic injection molding machine

NegotiableUpdate on 01/17

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The exhaust type automatic injection molding machine is equipped with four major systems for exhaust and dehumidification, namely the barrel (material barrel), screw, feeding device, and control panel.

Product Details

　　Exhaust type automatic injection molding machineMaintenance precautions

(1) Star and triangle starting motors must be operated only when turning to the triangle to avoid damaging the motor.

(2) Before testing, check whether each proximity switch is in the corresponding position for the implementation of the program.

(3) After using the new machine for a period of time, the power should be cut off to tighten the electric heating coil and the strong electrical wiring terminals inside the electrical box.

(4) When there is a power outage, all control buttons and switches should be in the stop position.

(5) When replacing electric heating elements and related electrical components, be sure to disconnect their control power supply, otherwise it is easy to damage the components and cause personal danger.

(6) The adjustable resistors on each control board of the computer cannot be adjusted arbitrarily by non professionals.

(7) To extend the service life and reduce the occurrence of faults, please conduct regular maintenance and remove dust and oil stains.

(8) After the machine is installed, it should be well grounded to avoid personal and equipment hazards.

(9) Oil and water are strictly prohibited from entering the electrical box.

(10) If a relay needs to be replaced, the same model of relay should be used.

　　Exhaust type automatic injection molding machineRegular inspection items

1. Daily check

⑴ Confirm that the emergency stop button can cut off the power supply to the electric motor of the oil pump.

⑵ Check that the central lubrication system is intact and undamaged. When the automatic central lubrication system is turned on, it should be able to automatically lubricate and automatically lubricate according to the settings during operation.

⑶ Keep the machine clean and its surrounding environment clean and unobstructed.

⑷ Check whether the temperature control system is normal and whether the temperature gauge adjusts the temperature of the heating cylinder correctly.

⑸ Check that the locking mode can be terminated when the safety door is opened or partially opened, and test it in three states: manual/semi-automatic/fully automatic.

Check if the working pressure of the oil pressure system is normal.

⑺ Check if the mold is securely installed on the headboard and mobile template.

When replacing the adhesive material, it is necessary to check whether it is necessary to clean the glue cylinder.

After starting up for a period of time, check whether the oil temperature rises too quickly, and the oil temperature should not exceed 50 degrees during long-term operation.

2. Zhou Cha

⑴ Add butter to all butter nipples.

⑵ Check that the switch and proximity switch are not loose.

⑶ Check that there is no oil leakage at the connections of each oil circuit, and promptly deal with any oil leakage found.

⑷ Tighten loose mechanical components.

3. Monthly check

⑴ Check that the safety door control pressure rod is secure and in the correct position.

⑵ Check that the wiring between electrical components should not be loose.

⑶ Check if the pressure oil is contaminated or damp.

⑷ Clean or replace the oil screen inside the fuel tank.

⑸ Remove the tail cover of the locking part and add butter to the mold adjusting screw.

4. Annual check

⑴ Check if the pressure oil needs to be replaced.

⑵ Check whether there is aging and hardening of the wires, especially those that often come into contact with lubricating oil or pressure oil.

⑶ Check if there is any wear on the injection screw.

⑷ Check the combination of oil pressure motor bearings, inject lubricating grease again or replace the bearings.