Automatic dehumidification exhaust injection molding machine

NegotiableUpdate on 01/17

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The automatic dehumidification exhaust injection molding machine is equipped with four major systems for exhaust and dehumidification, namely the barrel (material barrel), screw, feeding device, and control panel.

Product Details

　　Automatic dehumidification exhaust injection molding machineadvantage

1. No need to pre dry the water absorbing molding material, reducing the number of processes and saving time;

2. It can remove volatile substances to a minimum, improve the mechanical properties of the product, and enhance the appearance quality;

3. Improve the molding range, increase the product qualification rate, and make the process more stable.

4. Avoiding some material storage waste (such as occupying space, idle resources, and reducing capital turnover risks)

5. Improve product switching efficiency, changeover time, and waiting time;

6. Improve the utilization rate of factory layout and increase the rational utilization rate of equipment;

7. Using an injection molding machine dehumidification system can reduce the cost of injection molded products and significantly enhance the competitiveness of the enterprise

　　Automatic dehumidification exhaust injection molding machineNotes:

① Carefully read the instruction manual, familiarize yourself with the machine structure, and understand the functions of various electrical switches, instruments, and electrical components on the control panel and instrument panel.

② Connect the main power supply according to the requirements specified in the electrical section. The voltage used by the user must be consistent with the rated voltage of the local power equipment, and the machine's casing must be properly grounded according to electrical safety regulations.

③ Before starting the machine, check whether the wiring of each control button, master switch, electrical component, contact, etc. is loose, and place each switch in the disconnected position.

④ The motor can only be started when the working mode selection switch QC is placed in the manual or adjustment position. When starting the motor, observe whether its rotation direction is correct. If it is not correct, adjust the power program and start the motor manually on the computer.

⑤ When the machine is not running, the main power supply must be disconnected, and all buttons and commands on the control panel must be in the off position.

⑥ During normal use, electrical components should be regularly maintained, and the contacts of each electrical component should be checked for looseness. The travel switch should be reliable, and the distribution box should be kept clean and dry to ensure that the electrical components can work properly and extend their service life.