Wiring diagram of explosion-proof permanent magnet safety door device

JNMX-A1，FK-MEN-QC，INCHI-CMS/D1A，AYS-KD1-B ，INCHI-CMS/D1B，YQMS-15T2，YQWJ-CMS/D1A Collision type permanent magnet safety door device

It is a technically advanced proximity switch with stability, reliability, and consistency. The working principle is to generate a magnetic field around the sensor by changing the position and polarity of the trigger, which causes the sensor contacts to move. Internally installed with a strong magnetic device, when the end beam boarding gate approaches this product, the strong magnetic device tightly attaches the boarding gate to the device and outputs a signal to the electronic control system, synchronizing the locking of the door with the signal output, making it easier to operate and more convenient to pass through the end beam boarding gate.

working principle

By using the principle of magnetic induction, the internal switch is activated to achieve the purpose of connecting and disconnecting contacts, and to control the external circuit, overcoming the characteristics of poor contact and easy damage of mechanical collision switches.
This device is powered externally, and only the red and blue leads can be connected to the translation control circuit. In order to ensure that the internal status indicator lights of this device work properly, please choose to use it in the correct circuit.
Collision type permanent magnet safety door device

Technical Specifications:
1. Rated current: 6-15A
2. Environmental temperature: -20 ℃ -+65 ℃
3. Relative humidity:<95% (+25 ℃)
4. Suitable for environments with severe dust, including conductive powders
5. Suitable for places with moderate to low vibration or impact
6. Shell:
7. Rated circuit voltage: 110-380V

JNMX-A1，FK-MEN-QC，INCHI-CMS/D1A，AYS-KD1-B ，INCHI-CMS/D1B，YQMS-15T2，YQWJ-CMS/D1A Collision type permanent magnet safety door device

Notes:

1. This product is equipped with a strong magnetic device inside. When handling, installing, and using it, do not place the watch or phone near this product for a long time to avoid magnetization or damage.

2. The accessories of this product (iron stopper of 3mm or more) need to be made by the user according to the actual situation on site.

3. When the door is open, the indicator light is on and the switch is disconnected. When the door is closed, the indicator light is off and the switch is connected. If any abnormal phenomenon is found, please check the cause or replace the product in a timely manner.

Proximity switch J24-D10NK/24V

Proximity switch DT3-D40LK/15U

Magnetic switch KO electric shock form: dry spring contact
Proximity switch FMYC-D-D8L/S normally open (10-24V) DC 8mm
Proximity switch FMYS-AB10-D normally open 24VDC 10mm Ø 24
Proximity switch FMYDM-A-A10S normally open 24VDC 10mm Ø 30

Rope switch HQLS-T1-B

Deviation switch HQPK-PXA-02GKH-10-30-A

Sound and light alarm HQSG-A type; 2. Voltage: AC220V; 3. Power:
100W；4、 Voice prompt: Belt start, please pay attention

Proximity switch LJS-0505BK AC220V

Coal chute blockage protection device TYHSN-I

Proximity switch SQS1062-049BK (two-wire)

Anti deviation switch GHB-L-2

Position control switch XTD-SNK65G