Which is a good seller of lightning surge simulators

NegotiableUpdate on 01/16

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The NOISEKEN lightning surge simulator rental LSS-6330 meets the IEC61000-4-5Ed3 standard, IEC61000-4-12 Ed.3 (100kHz vibration wave), and ANSI/IEEE C62.45 (2002) vibration wave standard, with a high voltage of up to 6.7kV. It can perform standard or above tests on EUT using single-phase power supply, and can be connected to a computer to use software for automated testing.

Product Details

NOISEKEN lightning surge simulatorleaseLSS-6330

Meets IEC61000-4-5Ed3 and ANSI/IEEE 62-45 (2002), IEC61000-4-12 Ed.3 (100kHz) ringing wave standards, with a high voltage of up to 6.7kV, suitable for testing single and three-phase equipment, with pre check function, large LCD touch screen operation, can be connected to a computer to use software, and achieve automated testing.

NOISEKEN lightning surge simulatorleaseLSS-6330 product features:

Compliant with IEC61000-4-5 Ed.3 and IEC61000-4-12 Ed.2 (vibration frequency 100kHz), ANSI IEEE62-45 (2002);
Pre check function: simplifies the inspection before starting work;
Voltage/current monitoring port: You can check the status of the EUT when noise is applied during testing;
Large LCD touch screen on the front panel: The operation part uses a large LCD panel screen, which is simpler to set up and displays more clearly；
Adopting MPU control to simplify continuous testing: can automatically perform surge output/waveform switching/polarity switching;
Multiple testing modes: equipped with two modes, manual mode for standard testing and single test, as well as program mode for continuous testing under different conditions, allowing easy setting of testing conditions according to the application;
Adopting interlocking and emergency button design to ensure testing safety;
Equipment can simply check the output waveform detection terminal of the waveform before the test;
Accessory isolation transformer can prevent leakage current generated in the coupling decoupling circuit from affecting the EUT power supply (optional);

LSS-6330雷击浪涌模拟器

LSS-6330-A20	Photo left: Single phase model (surge generator andCDN）
LSS-6330-B63	Right of photo: Three phase 63A lightning surge tester (top: generator, bottom: overlapping unit)

Technical Specifications

■Common specifications for surge output unit LSS-6330-A20/- B63

project	Technical Specifications		remark
test waveform	1.2/50 μ s-8/20 μ s composite wave 10/700 μ s-5/320 μ s composite wave Zhenling Wave
1.2/50μs-8/20μs Integrated wave	open-circuit voltage	0.5kV ～ 6.7kV ±10%	Coupling circuit: 18 μ F Output line length: 0.5m Open circuit on the input side of the circuit
	Frontier Time/Half Peak Time	1.2μs ±30％／ 50μs ±20％
	Short circuit current	250A ～ 3350A ±10％
	Frontier Time/Half Peak Time	8μs ±20％／ 20μs ±20％
10/700 μs-5/320μs Integrated wave	open-circuit voltage	0.5kV ～ 6.7kV ±10%	Output line length: 0.5m
	Frontier Time/Half Peak Time	10μs ±30％／ 700μ s±20％
	Short circuit current	12.5A ～ 167.5A ±10％
	Frontier Time/Half Peak Time	5μs ±20％／ 320μs ±20％
Zhenling Wave	open-circuit voltage	0.25kV ～ 6.6kV ±10%	Output line length: 0.5m
	rise time	0.5μs ±30％
	frequency	100kHz ±10%
	Second peak voltage	40% -110% of the first peak voltage 40% -80% of the second peak voltage 40% -80% of the third peak voltage
	short-circuit current	8.3～550A±10%
	Rising time range	0.2～1μs
Output polarity	Positive/Negative
output impedance	2Ω±10%		1.2/50 μ s waveform
	40Ω±10%		10/700 μ s waveform
	12Ω±20%, 30Ω±20%		Ringing wave (optional)
Surge occurrence circuit mode	levitation
Short charging time	0.0kV~4.0kV: 5 seconds, 4.1kV~6.7kV: 10 seconds		1.2/50 μ s waveform
	0.0kV~4.0kV: 10 seconds, 4.1kV~6.7kV: 15 seconds		10/700 μ s waveform
	0.0kV~4.0kV: 1 second, 4.1kV~6.6kV: 3 seconds		Ringing wave (optional)
communication function	RS-232C interface fiber optic connector, Bluetooth connection		optional
	External CDN control
Emergency stop	Push lock button switch(Test stopped, high pressure closed, EUT)Line switch closed）
interlocking function	Connector status detection for external connectors
Warning light display	At the beginning of the experiment, the LED flashes and displays the color red
Warning light connector	Equipped with a connector for connecting warning lights. Warning light on at the beginning of the experiment		Three additional standard ports
EUT Fail	3 ports
Voltage monitoring	BNC output1/2000±10%		When the surge output is set to open circuit
current monitoring	BNC output1mV/A±10%		When surge output is set for short circuit
phase control	0°～360°±10°		EUT power supply AC90V Above, frequency 50 Hz/60Hz
trigger input	Non synchronous, AC line synchronous 0 °~360 °/1 ° step, external input
Naidong power supply	AC100V～AC240V ±10％　50Hz / 60Hz ±10％
operating environment	Temperature: 15-35 ℃, humidity: 25-75% RH
External dimensions/weight	W430 × H371 × D530 mm ／ About 55 kg

■Coupling output unit LSS-6330-A20

project
Surge waveform	1.2/50 μ s-8/20 μ s composite wave, vibration wave
1.2/50μs-8/20μs Integrated wave	open-circuit voltage	0.5kV ～ 6.7kV ±10%	Coupling unit: 18 μ F Output line length: 0.5m Input side open circuit
	Frontier Time/Half Peak Time	1.2μs ±30％／ 50μs ±20％
	short-circuit current	250A ～ 3350A ±10％
	Frontier Time/Half Peak Time	8μs ±20％／ 20μs ±20％
	open-circuit voltage	0.5kV ～ 6.7kV ±10%	Coupling unit: 10 Ω+9 μ F Output line length: 0.5m Input side open circuit
	Frontier Time/Half Peak Time	1.2μs ±30％／ 50μs +10μs /-25μs
	short-circuit current	41.6A ～ 558A ±10％
	Frontier Time/Half Peak Time	2.5μs ±30％／ 25μs ±30％
Zhenling Wave	open-circuit voltage	0.25kV ～ 6.6kV ±10%	Coupling unit: 4.5 μ F Output line length: 0.5m Output side open circuit
	Frontier Time	0.5μs ±30％
	frequency	100kHz ±10%
	Attenuation rate	The second peak is 40% -110% of the first peak The third peak is 40% -80% of the second peak The fourth peak is 40% -80% of the third peak
	short-circuit current	8.3 ～ 550A±10%
	Frontier time range	0.2 ～ 1μs
EUT power supply capacity	AC240V/20A MAX 50/60Hz、DC125V/20A MAX
Decoupling coil	1.5mH
Under voltagedrop	Below 10% of the rated voltage when passing through the rated current		At the communication output end
residual voltage	Apply 15% surge voltage or less than twice the rated voltage of the power line

■Coupling output unit LSS-6330-B63

project
Surge waveform	1.2/50 μ s-8/20 μ s composite wave, vibration wave
1.2/50μs-8/20μs Integrated wave	open-circuit voltage	0.5kV ～ 6.7kV ±10%	Coupling unit: 18 μ F Output line length: 0.5m Input side open circuit
	Frontier Time/Half Peak Time	1.2μs ±30％／ 50μs ±20％
	short-circuit current	250A ～ 3350A ±10％
	Frontier Time/Half Peak Time	8μs ±20％／ 20μs ±20％
	open-circuit voltage	0.5kV ～ 6.7kV ±10%	Coupling unit: 10 Ω+9 μ F Output line length: 0.5m Input side open circuit
	Frontier Time/Half Peak Time	1.2μs ±30％／ 50μs +10μs /-25μs
	short-circuit current	41.6A～558A ±10％
	Frontier Time/Half Peak Time	2.5μs ±30％／ 25μs ±30％
Zhenling Wave	open-circuit voltage	0.25kV ～ 6.6kV ±10%	Coupling unit: 4.5 μ F Output line length: 0.5m Output side open circuit
	Frontier Time	0.5μs ±30％
	frequency	100kHz ±10%
	Attenuation rate	The second peak is 40% -110% of the first peak The third peak is 40% -80% of the second peak The fourth peak is 40% -80% of the third peak
	short-circuit current	8.3～550A±10%
	Frontier time range	0.2～1μs
EUT power supply capacity	AC600V/63A MAX 50/60Hz、DC125V/63A MAX
Decoupling coil	1.5mH
Under voltagedrop	Below 10% of the rated voltage when passing through the rated current		In communication outputend
Residual voltage	Apply 15% surge voltage or less than twice the rated voltage of the power line
phasebitcontrol	0°～360° ±10°		EUT power supply AC90V or above, frequency 50Hz/60Hz
drive power supply	AC100V ～ AC240V ±10％　50Hz / 60Hz ±10％
operating environment	Temperature: 15-35 ℃ Humidity: 25-75% RH
Overall dimensions	W430 × H695 × D686 mm

This tester requires an additional isolation transformer.

Attachment:

name	Specifications
Operation Manual	1 set
Factory Verification Report	1 copy
power cord	1 piece
Surge output cable	3根（A20）/5 根（B63）

Corresponding standards and configurations:

Surge testing standards	Model Configuration	description
IEC61000-4-5	LSS-6330-A20/B63	Test host;
IEC61000-4-5	TF-2302P/6503P	Isolation transformer; (Can be customized)

Other testing options:

Non IEC standard options	LSS-INJ6401SIG	CDN (Coupling Decoupling Network) for interconnection;
	LSS-INJ6401TEL	Communication line coupling decoupling network; Communication line testing network
	LSS-CDN6351	Three phase coupling decoupling network; Three phase electrical testing network
	07-00022A	USB optical communication module; Connect the computer to the emulator using an adapter
	11-00005A	Safety protection box for the tested object; Size: W400 × D300 × H300mm
	11-00006A	Safety protection box for the tested object; Size: W600 × D350 × H400mm
	11-00008A	Warning lights; Signal lights that draw attention from the surroundings
	11-00015A	Three color indicator light; Change colors according to different testing states
	18-00048B	A wiring board with multifunctional sockets; Replace the output terminal with a corresponding multi-functional socket terminal block
	18-00081A/82A/83A	Socket box; Adapt to different countries