Which is a good intelligent high-frequency noise simulator

NegotiableUpdate on 01/16

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The Japanese NOISEKEN 2KV high-frequency noise simulator NS-S220 meets the Japanese JIS industrial standard, with a high voltage of 2kV and a bandwidth of up to 1 μ s. The new model uses semiconductor relays to improve the stability of the test pulse waveform and adds options for various tests.

Product Details

NOISEKEN 2KV High Frequency Noise Simulator from JapanINS-S220

Meets Japanese JIS industrial standards, with a high voltage of 2kV and a bandwidth of up to 1 μ s. The new model uses semiconductor relays to improve the stability of the test pulse waveform, enabling better quantitative and reproducible testing than before; Add options for various tests.

NOISEKEN 2KV High Frequency Noise Simulator from JapanINS-S220Product Features:

Can achieve high-speed pulse cycle switching testing: because the frequency of pulse switching is very fast, the occurrence rate of misoperation will also increase, and it can be expected that the testing time will be shortened;
The setting of pulse width is very simple: simply press the button to set in 50ns steps, which shortens the setting time and reduces the occurrence of wiring errors;
The stability of the test pulse waveform is better, and it can achieve highly reproducible testing;
Reduced the quantity of consumables and effectively lowered usage costs;
By using a short-circuit plug, it is very easy to switch between common mode/differential mode testing;
The instrument is equipped with a 50 Ω terminal, which is easy to wire;
Through the output panel, the EUT's AC plug can be directly connected; (Optional)
Simulators can conduct various experiments through various probes, coupling clips, adapters, etc; (Optional)
By adding a coupling network, experiments on EUT power supply three-phase 5-wire can be conducted; (Optional)

Specifications:

project				Specifications
Pulse setting range ①		Pulse output voltage		0.5kV~0.99kV ± 10% 0.01k step
		pulse width		100ms～1000ns±10%
		repetition cycle		1ms~999ms ± 10% 1ms step
Pulse setting range ②		Pulse output voltage		1.00kV~2.00kV ± 10% 0.01kV step
		pulse width		50ns~1000ns ± 10% 50ns step
		repetition cycle		10ms~999ms ± 10% 1ms step
output voltage				0.5-2kV ± 10% (10V step)
polarity				Positive/Negative
rise time				Below 3ns
output impedance				50Ω
Terminal impedance				50Ω
repetition cycle	Line phase		50Hz/60Hz injection phase angle 0-360 °± 10 ° (1 ° step) superimposed with L-N synchronous output
	duration		1ms to 999ms ± 10% (pulse setting range ①) 10ms to 999ms ± 10% (pulse setting range ②)

	external trigger		Selection period: 10ms or more Pulse width: 1ms or more Input level: TTL/Open circuit rectifier negative logic If LINE PHARE mode is selected and the input period is 16-20ms, it will be recognized as the synchronization signal of CDN

	1 SHOT		Press the 1SHOT key once to output once Synchronize the phase angle output with the phase angle output in PHARE mode

Memory capacity			5 experiments
Test time			1-999s ± 10% 1-second step
Overlay phase switching			L (+), N (-), PE/PULSE OUT ※ Manually switch with coaxial line
Blending Mode			Common mode/differential mode ※ Manual switching with short circuiting plug
Power capacity of the tested equipment (EUT)			单相 AC240V/DC125V 16A（L（＋），N（－），PE）
power supply			AC100～240V 50Hz/60Hz
Temperature/humidity range for use			15～35℃ 25～75℃
Size			(W) 430 × (H) 249 × (D) 540mm (excluding protrusions)/approximately 20kg
High voltage coaxial joint			NMHV Noiseken
attachment			Coaxial line 30cm (02-00013A): 2 pieces, SG short-circuit plug (02-00106A): 1 piece, SG connection wire (05-00103A): 1 piece, output panel: 1 piece, AC power cord: 1 piece, operation manual: 1 volume, accessory package: 1 piece

Attachment:

name	model	quantity	description
coaxial cable	02-00013A	2 pieces	Set line for pulse output, 30cm
SG sets short-circuit plug	02-00106A	1 piece	NMHV NOISEKEN specification plug
SG connection line	05-00103A	1 piece	Grounding connection wire
Output panel		1 piece	NMHV NOISEKEN specification panel, installed
power cord		1 piece	Single phase terminal lifting type AC240V/DC60V 16AMax
Operation Manual		1 volume
attachment package		1 piece

High frequency noise simulatorRecommended configuration:

High frequency testing standards	Model Configuration	description
Japanese JIS Industrial Standards	INS-S220	High frequency noise simulator;
Japanese JIS Industrial Standards	EFTD	Pulse group experimental table;

Other testing options:

Non standard options	IJ-4050	Three phase coupling network: AC415V 50A
	18-00084A	Output panel; Provide plugs for plugging in
	00-00017A	Attenuator for waveform observation; DC～2GHz：40dB
	00-00011A	Attenuator; 20dB • N-type connector
	15-00014A	Coupling clip; Capacitive coupling, wire diameter 20mm, high input voltage: 4000V
	CA-805B	Coupling clip (capacitive coupling); Device for testing signal lines
	CA-806	Coupling clip; Magnetic field coupling, wire diameter 27mm, high input voltage: 2000V
	H2-B	EMS probe kit; Accessories for radiation testing

INS-S220选件

辰仪科技