Wall mounted vibration monitoring device

NegotiableUpdate on 02/24

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Overview: Intelligent vibration monitoring device can measure the vibration of the casing or structure relative to free space, especially suitable for machines with ball bearings. In this type of machine, the vibration of the shaft can be transmitted to the casing more. Therefore, the monitoring device can be equipped with a magnetic electric speed sensor to continuously measure and protect the rotating machinery. The installation of the sensor should be particularly careful not to reduce the amplitude of the sensor, nor to change the frequency effect or the generated signal cannot represent the true vibration of the machine. This monitoring device is particularly suitable for situations where vibration points need to be measured, such as motors, compressors, fans, etc.

Product Details

Functional Description

lImplement intelligent processing: alarmThe values of I and II can be set arbitrarily through the panel buttons

lThe panel buttons can adjust the range value without the need for potentiometer adjustment, making it convenient for on-site debugging

lIf you don't press the operation key for one minute, you can return to the running state by yourself

lAlarm delay adjustment range0.1~3 seconds to prevent false alarms caused by on-site interference

lEquipped with power up and power down detection functions, while cutting off alarm and shutdown output circuits, it can effectively suppress instrument false alarms

lThere is a current output terminal on the back panel that is proportional to the vibration amplitude for recording output

lVibration displacement and vibration intensity can be freely switched

technical indicators

lFrequency range:10~300Hz

lSensor sensitivity:20mV/mm/S±5%

lquantity Cheng: Vibration displacement0-200 μ m (P-P) (optional)
vibration severity0-20mm/s (RMS) (optional)

laccurate indeed Degree:± 1% (full scale)

lCurrent output: 4~20mA

lSwitching output:DC 28V/ 1A or AC220V/2A (normally open)

lAlarm setting: Any setting within the full range

lEnvironmental temperature: During operation:0~65℃
During storage:-30~80℃

lRelative humidity: to95%, non condensing

lPower supply voltage:220VAC/50Hz±10% 50mA

lOverall dimensions:160×80×160mm

lHole size:152⁺¹×75⁺¹mm