UV disinfection equipment for tap water

Selection of overcurrent ultraviolet sterilizerUV disinfection is an efficient, non chemical method for inhibiting spoilage, with low maintenance costs and no secondary pollution. As a purely physical disinfection method, UV disinfection can effectively remove the vast majority of microorganisms in water without producing any disinfection by-products, ensuring that the microbial level at the water point is within the specified quality standards. UV sterilizers have the advantages of simplicity, convenience, broad-spectrum efficiency, no secondary pollution, easy management, and automation. With the introduction of various new designed UV lamps, the application scope of UV sterilization is constantly expanding, and it has become a highly competitive sterilization and disinfection product in the field of water disinfection.

Installation:

1. The equipment should be installed horizontally, and vertical installation is strictly prohibited. The cylinder should not bear external pressure;

2. The equipment should be installed at the outlet of the water tank. If the water volume is large, the water pressure is high, or the pipe network is too long, it is better to install it in the branch pipe;

3. During installation, there should be a space of more than 1m at both ends of the equipment for easy maintenance, and the electrical control box should be waterproof and rainproof;

4. During equipment installation, bypass pipelines and shut-off valves should be installed for easy maintenance;

5. It is strictly prohibited to exceed the rated working pressure during use, and equipment components should be protected from violent water flow impact;

6. After installation, connect the power supply.

Selection of overcurrent ultraviolet sterilizerThe sterilization range is wide and rapid, with a short processing time. Under certain radiation intensity, pathogenic microorganisms can generally be killed in just over ten seconds. It can kill some bacteria that cannot be inactivated by chlorine disinfection methods, and can also control some higher aquatic organisms such as algae and red worms to a certain extent; UV disinfection is a physical method that does not add any substances to the water and has no side effects. This is where it is superior to chlorine disinfection. It is usually used in combination with other substances, and common combination processes include UV+H2O2, UV+H2O2+O3, UV+TiO2, which will result in better disinfection effects.