Supplier of fully automatic paper forming machine

Paper sheet forming and copying machine is a type of machine that utilizes the fast Kaiser method orTappiThe forming method involves wet forming plant fibers, animal fibers, inorganic fibers, chemical fibers, synthetic fibers, and other materials into paper or thin sheet material devices. It can also be quickly dried by combining with atmospheric pressure and high temperature drying, or vacuum high temperature drying and other drying methods.

Research institutions and enterprise R&D units usually use this equipment for traditional pulp and paper sheet forming, wet sheet forming of inorganic fibers such as carbon fiber, glass fiber, ceramic fiber, etc., and aramid fiberPETfiberPBOfiberPPSWet paper forming of polymer chemical fibers such as fibers, wet sheet forming of nanomaterials such as nanocellulose fibers, microcrystalline cellulose fibers, graphene, carbon nanotube fibers, etc.

After using a paper forming machine to make various sheet-like samples of materials in the laboratory, these samples can be used for more accurate data analysis of various wet processes, wet process formulations, product physical properties, product optoelectronic properties, chemical properties, and more.

Guangdong Faibo Fiber Technology Research Co., Ltd. and its subsidiary (Faibo Pulp and Paper Technology Development Co., Ltd.) are one of the few companies in China that specializes in fiber wet process application technology

Standard basis（Standard）：

GB/T24324-2009TheQB/T3703-1999TheSO 5269/2 & ISO 5269/3，5269/2,NBR 14380/99, TAPPI T-205, DIN 54358,ZMV/8/76

• Application range: 5-95SR or 50-885CSF

• Slurry pool capacity: 10000ml

• Molding specifications: circular 200mm, square 260/300/400/500/600mm

• Molding method: Switching between high filtration mode and low filtration mode

• Forming uniformity control: 0.235cm2/H, dot matrix type

• Layout of slurry pool: The height between the slurry pool and the operating table is less than 60mm

• Molding size: There are two specifications: circular and square, and production is available for each size

• Drying station: with 2 drying positions, with 1 drying position, or without a drying position, depending on the actual situation

• Machine material: The entire machine is made of 304 # stainless steel, except for the operation panel and some components

• Vacuum configuration: gravity vacuum and strong vacuum modes can be switched

• Homogenization method: automatic and manual homogenization integrated, selected according to the actual slurry type

• Water filtration structure: three-layer water filtration structure, double layered mesh, mesh deformation control: TAPPI mode spacing less than 0.2mm

• Network blockage prevention: equipped with on-site cleaning function at the workstation, no need to separately clean the formed network

• Vacuum method: Water ring vacuum, 5-channel, PTFE high-temperature and high-pressure corrosion-resistant pipeline.

• Drying vacuum degree: -0.01-0.09Mpa infinitely variable

• Vacuum degree of filtration: Full power hydraulic vacuum output, working vacuum varies within the range of -0.001~-0.06Mpa according to material characteristics

• Pressure structure: adjustable lifting range from 0.1-10.0mm

• Exhaust hole direction: steam convection

• Heating method: Disc heating to ensure uniform temperature distribution in the transverse direction and achieve uniform heating.

• Drying temperature: adjustable infinitely from room temperature to 120 ° C

• Temperature Control System: Imported Omron Temperature Control System

• Drying time: adjustable from 1 to 99.99 minutes

• Vacuum sealing film cover: pure silicone film cover

• Tap water circulation: One click tap water circulation system

• White water circulation: equipped with a white water circulation system

• White water tank structure: 304 # stainless steel white water circulation box.

• Power supply: 220V, 50Hz