Supplier of fully automatic fiber disintegrator

Fiber dissociating disperser (also known as standard fiber dissociating device, standard fiber agitator) is a standard dissociating machine that dissociates bundled fibers into single fibers by high-speed rotation of pulp fiber raw materials in water. Used for the preparation of manual paper making, determination of water filtration degree, and screening of test samples.

Fiber dissociation disperser is suitable for the dissociation and dispersion of plant fibers such as wood pulp, bamboo pulp, cotton pulp, hemp pulp, waste paper pulp, etc. It is also suitable for the dissociation and dispersion of polymer synthetic fibers and polymer artificial fibers, such as aramid fiber, PET fiber, PPS fiber, Tencel, acetate fiber, etc. It is also suitable for the dissociation and dispersion of inorganic fibers, such as glass fiber, ceramic fiber, carbon fiber, mineral fiber, etc.

FFiber Disperser 01A is a specialized device for fiber dissociation and dispersion. The fiber dissociation and dispersion device is produced according to the process technology requirements of GB/T 24327 "Laboratory wet dissociation chemical pulp dissociation", ISO 5263 "Pulp Laboratory wet dissociation of chemical pulp", JIS P822-1 "Pulp Laboratory wet dissociation Part 1: Disintegration of chemical pulp 1", TAPPI-T 205 sp-02 "Forming hand sheets for physical tests of pulp", and is specifically designed for laboratory wet dissociation and dispersion equipment. The fiber disperser produced by FAOBO meets all the requirements of standards such as GB/T 24327, ISO 5263, JIS P822-1, TAPPI-T 205 sp-02, etc.

Function Configuration

1. Transparent slurry bucket

2. Quickly fasten the handle tightly to the sealing device

3. Double layer bearing structure with waterproof layer

4. Drive bearings with membrane isolation.

5. Equipped with a motor baffle.

6. Carry overflow water recycling.

7. The number of dissociation times can be freely set according to the type of pulp

Technical Specifications

Applicable range of beating degree: filtration performance (4~96) ° SR

The inner diameter size of the container is Φ (152 ± 2) mm × H (191 ± 2) mm

Slurry concentration of 0.8%, 1.2%, or 2.2% k

The container has a capacity of approximately 3.0L

The mixing chamber is made of transparent material, and the slurry guide strip is also made of transparent material

The power structure bearing adopts a double-layer structure with a waterproof layer

Bearing protection transmission shaft with isolation film

The wastewater recycling chamber is equipped with a wastewater recycling box, which can quickly transfer wastewater

Motor protection belt protective barrier

Slurry chassis 06Cr19Ni10 anti-corrosion platform

Internal baffle spiral internal spiral structure: 6.5 * 6.5 * 51 * 4

Height on the baffle (57 ± 1) mm

Height under the baffle (32 ± 1) mm

Hydraulic pressure hydraulic shear 6mm, hydraulic compression structure

Mixing impeller speed frequency (48.3 ± 1.65) S-1

Mixing speed (standard) (2898~2994) r/min/

Rotating diameter of 90

Edge radius R=0.8mm

End radius R=4.0mm

Dimensions 450 × 265 × 395mm

Power supply 220V, 50HZ, 200W

weight42kg