Strong resistance to TUF tubular softening film

NegotiableUpdate on 01/16

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

TUF tubular softening membrane is a membrane layer of fluorinated polymer cast on the inner wall of a sintered organic polymer porous support tube, allowing the filter membrane to deposit in the wall layer of the sintered porous plastic tube, with its effective interception interface located at the inner wall of the support tube.

Product Details

TUF tubular softening filmtable

model	TUF-1	TUF-15	TUF-37	TUF-61
Effective area (m2)	0.07	1.05	2.59	4.27
material	PVDF	PVDF	PVDF	PVDF
Filter aperture (nm)	50	50	50	50
Number of membrane tubes (root)	1	15	37	61
Membrane tube diameter (mm)	12.7	12.7	12.7	12.7
Concentrated water interface size A	Φ38mm	4 'Copy Forest (American Standard)	6 'Copy Forest (American Standard)	8 'Copy Forest (American Standard)
Length B	1828.8mm(72')	1828.8mm(72')	1828.8mm(72')	1828.8mm(72')
Water production interface size C	3/4'NPT	Φ38mm	Φ73mm	Φ73mm

TUF tubular softening filmCan remove heavy metals (Ca2+, Mg2+, Ba2+, Sr2+); Friction resistant, suitable for solid-liquid separation of rough particles; Microporous membrane, providing excellent filtration water quality and low SDI (generally less than 0.5 NTU); Large channel, cross flow circulation, allowing high solid load without pre-treatment.

The TUF series tubular softening membrane is a membrane layer of fluorinated polymer cast on the inner wall of a sintered organic polymer porous support tube, allowing the filter membrane to deposit in the wall layer of the sintered porous plastic tube. Its effective interception interface is located at the inner wall of the support tube.

The TUF series tubular softening membrane sintering tube process gives the membrane core a "peak and valley" filtration inner surface structure, and the support tube "peak" can protect the PVDF membrane located in the "valley" from high abrasion and water ingress wear.

Through parallel testing of anchored membrane tubes (T-F softened membrane) and coated membrane tubes (from other manufacturers), the filtration layer of the anchored membrane was found to be intact and functioning normally; The coating membrane filtration layer is layered, and the membrane skin peels off, exposing the supporting pipe wall.

1. High throughput:

The operating flux can reach 200~5001mh, and the membrane flux can be restored through chemical cleaning.

2. Strong anti blocking:

A large channel with a 12.7mm aperture can create turbulent flow to avoid blockages and siltation.

3. Pollution resistance:

Special process design can form a cross flow cycle to wash away waste residues on the surface of the membrane, greatly improving the membrane surface's resistance to fouling..

undefined