Selling stainless steel small submersible mixers

Sewage stainless steel submersible mixerNeed to work underwater; Cannot work in environments with flammable, explosive, or highly corrosive liquids; The steel expansion bolt must be fixed as required, and after installation, the cable must be tightened and fixed securely.

Product Features:

1. The submersible mixer has a compact structure, simple operation and maintenance, easy installation and maintenance, and a long service life;
2. The hydraulic design structure of the submersible mixer impeller has high working efficiency, and the swept back blades have self-cleaning function, which can prevent debris from entangling and blocking;
3. Mixing a submersible mixer with an aeration system can significantly reduce energy consumption, increase oxygen filling capacity, and effectively prevent sedimentation;
4. The insulation level of the motor winding is F, and the protection level is IP68. High quality bearings and anti condensation devices are selected to make the operation of the motor safer;
5. Two mechanical seals.

Sewage stainless steel submersible mixerNotes:

1. Before use, check whether the cable is intact and whether the motor insulation resistance meets the requirements. The motor must be reliably grounded, and the grounding wire should be reliably grounded. The wire diameter should be the same as the cable core wire, and the grounding resistance must be less than 4 Ω.

2. When using a mixer, it is necessary to purchase the corresponding starting protector or a starting protector with the same performance. The motor and starting protector should be connected correctly, and the protector must be reliably grounded.

3. It is strictly prohibited to carry out live work when wiring electrical appliances such as motors and starting protectors to prevent electric shock.

4. During the use of sewage submersible mixing equipment, it should be regularly monitored and inspected. In the event of any malfunction, the power must be cut off first before inspection and troubleshooting. It is strictly prohibited to perform live checks or operate with faults. When any of the following situations occur, the machine should be stopped immediately for inspection and troubleshooting.

5. At the place of use, warning signs should be set up to prevent electric shock and prohibit entry, warning people not to enter dangerous areas and avoid electric shock.

6. The sewage submersible mixing equipment should not be turned on or off too frequently, with an interval of no less than 2 minutes from turn off to restart, to prevent excessive temperature rise of the motor.