Radio frequency conduction BCI high current injection probe

NegotiableUpdate on 01/17

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

BCI high current injection probe 1KHz-500MHz is a snap on high current injection probe that expands our affordable EMC pre-test product range

Product Details

BCI high current injection probe 1kHz-500MHz

1. Overview

TBBCI1-800K420It is a snap on high current injection probe that expands our affordable EMC pre-test product range

According to the ISO11452-4 standard, BCI probes are mainly used for anti-interference testing of automotive products in the frequency range of 1MHz to 400MHz. For most of its bandwidth, the insertion loss is 5dB. In the frequency range of 250 kHz to 230 MHz, it complies with the insertion loss specification of ISO11452-4. This probe has individual characteristics and can be used in the frequency range of 10 kHz to 450 MHz. The TBBCI1-800K420 current injection probe can be used to inject severity levels I (60mA), II (100mA), III (150mA), IV (200mA), and customer specific severity level V, up to 350mA.

TBBCI-800K420The injected current probe has a space of 27mm, a typical insertion loss of 5dB, and a typical transmission impedance of 26dB

This probe can also be used for RF current monitoring applications.

1. Product Features

n 10KHz-500MHzfrequency range

n Individual calibration, split fixture design

n Compliant with IEC/EN 6100-4-6 ISO11452-4

n Typical insertion loss 5dB, typical transmission impedance 26dBOhm

n 27mmAperture, 1-year warranty

2. Application

1. RF immunity test

Insertion loss and transmission impedance meter

The following table shows the typical insertion loss and transmission impedance data of TBBCI1-800K420 BCI probe. Each current probe comes with a corresponding measurement protocol. These data can be used to calculate the power required for immunity testing, or to create calibration files for EMCview or similar EMC measurement software. Subtract the transmission impedance in dB Ω from the analyzer reading in dB μ V to obtain the corrected reading in dB μ A.

frequency[MHz]	insertion loss	Transmission impedance[dB Ω]	frequency[MHz]	insertion loss[dB]	Transmission impedance[dB Ω]
0.01	-41,75	-7,75	130	-4,34	29,66
0.02	-35,70	-1,70	140	-4,34	29,66
0.03	-32,17	1,83	150	-4,36	29,64
0.04	-29,68	4,32	160	-4,39	29,61
0.05	-27,75	6,25	170	-4,41	29,59
0.06	-26,18	7,82	180	-4,45	29,55
0.07	-24,85	9,15	190	-4,51	29,49
0.08	-23,71	10,29	200	-4,56	29,44
0.09	-22,70	11,30	210	-4,61	29,39
0.1	-21,80	12,20	220	-4,66	29,34
0.2	-16,04	17,96	230	-4,69	29,31
0.3	-12,88	21,12	240	-4,72	29,28
0.4	-10,85	23,15	250	-4,73	29,27
0.5	-9,45	24,55	260	-4,73	29,27
0.6	-8,45	25,55	270	-4,71	29,29
0.7	-7,72	26,28	280	-4,69	29,31
0.8	-7,19	26,81	290	-4,66	29,34
0.9	-6,82	27,18	300	-4,62	29,38
1	-6,54	27,46	310	-4,58	29,42
2	-5,73	28,27	320	-4,55	29,45
3	-5,56	28,44	330	-4,52	29,48
4	-5,47	28,53	340	-4,52	29,48
5	-5,40	28,60	350	-4,54	29,46
6	-5,34	28,66	360	-4,61	29,39
7	-5,29	28,71	370	-4,73	29,27
8	-5,24	28,76	380	-4,91	29,09
9	-5,19	28,81	390	-5,15	28,85
10	-5,14	28,86	400	-5,51	28,49
20	-4,82	29,18	410	-6,05	27,95
30	-4,70	29,30	420	-6,77	27,23
40	-4,61	29,39	430	-7,57	26,43
50	-4,56	29,44	440	-8,33	25,67
60	-4,50	29,50	450	-9,26	24,74
70	-4,47	29,53	460	-11,03	22,97
80	-4,43	29,57	470	-14,36	19,64
90	-4,39	29,61	480	-19,31	14,69
100	-4,38	29,62	490	-24,65	9,35
110	-4,36	29,64	500	-28,97	5,03
120	-4,34	29,66

Insertion loss and transmission impedance, 100KHz-500MHz, typical data

technical indicators

type	Current injection probe
Compliant with	ISO 11452-4；IEC/EN 6100-4-6
frequency range	10KHz – 500MHz
insertion loss	5dB @Typical value, 50 ohms (100 ohms loop impedance)
Transmission impedance	29dBΩ @ typical value, 50 ohms (100 ohms loop impedance)
input power	Inject test levels I/II/III/IV according to ISO11452, 350mA
temperature	80℃
connection interface	Ntype
inner diameter	27mm
diameter	92mm
height	76mm
weight	1.2 Kg
warranty	1year
Standard Configuration	Probe, manual, cable, calibration certificate
option
-	Calibration fixture