Pulse High Voltage Probe HP6015A

One summary:

High voltage probe HP6015A 20kV attenuation factor 1000XIt is a high-voltage probe with a ground input impedance of 100 M Ω, 3.0 pF, and an attenuation factor of 1000X. It requires an input resistance of 1 M Ω and an input capacitance of 7 pF to 49 pF when connected to oscilloscopes and other measuring devices. The measurement voltage can reach up to 20kV (DC+Pk), with an instantaneous pulse voltage of 40kV and a bandwidth of up to 100MHz. The standard BNC interface, compatible with any manufacturer's oscilloscope, is very suitable for single ended to ground high voltage measurement scenarios.

IIHigh voltage probe HP6015A 20kV attenuation factor 1000XProduct Description

① Probe test signal input end, equipped with straight * and hook shaped test pins, fixed with M4 threads, can be replaced as needed.

② The probe has a reference ground terminal and comes with a standard detachable crocodile clip. When measuring, it is required that the probe clip be reliably grounded.

③ The protective ring at the front end of the probe ensures personal safety by placing people behind the protective ring during measurement.

④ The front handle of the probe can be used to fix the probe during measurement.

⑤ Signal connection cable, standard 3-meter connection cable.

⑥ Probe compensation box, with a standard male BNC output interface, directly connected to an oscilloscope. If necessary, compensate the probe through the adjustable hole above.

III Product electrical specifications

Test conditions: ambient temperature of 25 ℃± 5 ℃, oscilloscope input impedance of 1M Ω± 2%

4、 Other products - current probes

HCP8050 jaws can clamp wires with a diameter of up to 5mm; It can measure continuous current of 50A and peak current of 75A, providing a bandwidth of 50MHz; The probe has two ranges to choose from: 50A (10X) and 7.5A (1X). The 7.5A (1X) range is particularly suitable for small current measurements, with a resolution of up to 1mA.