High frequency and high voltage probe P6015A

1High voltage probe Tektronix P6015AOverview

Tektronix P6015A High Voltage Probe is a high-voltage probe developed by Tektronix, with a rise time of 4.0ns.

IIHigh voltage probe Tektronix P6015Afeature

1. High voltage: 20kV DC/40kV peak (100ms pulse width)

2. High bandwidth - DC to 75 MHz

3. Silicone resin dielectric

4. Optional 1000X with header code

5. Wide compensation range (7-49pF)

6. Large capacity multifunctional ground wire and crocodile clip

3、 Specification parameters

4、 Application

① Power supply design

② Design motor driver
③ Electronic ballast
④ Power semiconductor
⑤ Switch type control
⑥ UPS system
⑦ Power converter

5、 The P6015A high-voltage probe has become the industry standard for measuring large capacity and high-performance voltages above 2.5 kV. You can measure DC voltages up to 20 kVRMS, as well as pulse voltages up to 40 kV (peak, 100 ms pulse width). A bandwidth of 75 MHz allows you to capture fast high-voltage signals. The dielectric used in P6015A is environmentally friendly silicide and does not require refilling. More features include: it has a compensation range of 7-49 pF, a small compensation box suitable for adjacent amplifier inputs, and a header suitable for most Tektronix digital oscilloscopes. After using the header, the displayed voltage amplitude is the actual signal value, and there is no need to convert it by a coefficient of 1000.

6、 Other products - EMI test receiver

The EM5080 series is a fully digital pre certified time-domain receiver, with a bandwidth of 9kHz-30MHz for the EM5080L, 9kHz-500MHz for the EM5080M, and 9kHz-1GHz for the EM5080B. It complies with the CISPR16-1-1 standard. Using real-time analysis technology platform and powerful PC platform supercomputing capability to perform real-time high-speed FFT analysis and calculation on broadband signals, with a real-time bandwidth of up to 10MHz, the EM5080 series can measure electromagnetic interference at an extremely fast speed. The EM5080 series adopts time-domain scanning, which is more than 500 times faster than traditional point by point scanning receivers. The interference measurement that used to take several hours can now be completed quickly in just a few seconds, saving a lot of time and cost during product development and certification; Simultaneously equipped with real-time spectrum analysis function; Featuring a 10.4-inch high-definition large screen display and clear structured menus, it is very convenient to use; Adopting Windows 7 operating system, easy to upgrade and maintain; Digital time-domain receivers have advantages such as fast scanning speed, high accuracy, and good stability.