Production of high-precision CS-2 speed sensor

NegotiableUpdate on 01/17

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The parameters of the CS-2 speed sensor are relative to the electric sensor. From the perspective of mechanical receiving principle, it is a displacement sensor. Due to the application of electromagnetic induction law in the electromechanical transformation principle, the electromotive force generated is proportional to the measured vibration speed, so it is actually a speed sensor. Eddy current sensor is a relative non-contact sensor that measures the vibration displacement or amplitude of an object by changing the distance between the sensor end and the measured object. Eddy current sensors have the advantages of a wide frequency range (0-10kHz), a large linear operating range, high sensitivity, and non-contact measurement,

Product Details

Ø Introduction:

The CS-2-2 gear reverse speed sensor is used to detect the forward and reverse rotation, speed, and linear velocity of the axle, gear, and rack. The acceleration of the measured object can also be obtained through calculation and processing. This sensor has good low-frequency and high-frequency characteristics. Low frequency can reach 0Hz and can be used for zero speed measurement of rotating machinery. As the sensor can provide two speed signals with a certain phase difference, it can be used for forward and reverse discrimination; The high frequency can reach up to 20KHz, which can meet the high-speed measurement requirements in most fields.

Electrical indicators:

Working voltage:

5 to 24V

Measurement range:

0到20KHz

² Output signal:

Square wave, whose peak to peak value is equal to the amplitude of the working power supply voltage, independent of the speed, with a large output current of 20mA

Ø Physical indicators:

Speed measuring gear form: arbitrary

Thread specification: M16 × 1

Installation gap: 1 to 5mm

Environmental indicators:

Working temperature: -10 to+100 ℃

Ø Ordering Guide:

CS-2-2-AXX-BXX-CXX-DXX

Sensor length AXX: 01-60mm

02-80mm

03-120mm

04- Special specifications (large length of 300mm)

Thread specification BXX: 01-M16 × 1

02- Special Specifications

Cable length CXX: ordered in increments of 1 meter, for example: 010=1.0m, default 2m

Connector options DXX: 0 1- Direct lead wire

0 2- Aviation plug

CS-2 speed sensor parameters

Purpose: The function of a sensor is to convert the measured rotating machinery into a usable signal output device according to certain rules

Working principle: A speed sensor is a sensor that is sensitive to magnetic induction intensity, magnetic field intensity, and magnetic flux, and can convert these signals into electrical signals.

Technical parameters of CS-3F anti rotation speed sensor: 1. Measurement range: 0-20000 pulses/second 2. Measurement accuracy: ± 1 pulse/second 3. Installation distance: ≤ 1mm 4. Gear modulus: ≥ 1 5. Gear thickness: ≥ 5mm 6. Output mode: collector open circuit output 7. Environmental temperature: -40~120 ℃ 8. Power supply voltage: DC 12V~DC 24V 9. Power consumption: 1W 10. Installation size: M16 × 1