Production of domestically produced explosion-proof magnetic switches

CJK-1Z explosion-proof magnetic proximity switch and deceleration parking magnet

CJK-1Z, CJK-2Z, CJK-3Z, CJK-4Z, CJK-4Z, HRCX20, HRCYJJ intrinsically safe explosion-proof magnetic switches for mining use

Main specifications/special functions

The outer shell of the magnet is made of brass or stainless steel

1. Used in conjunction with limit switches

2. The distance between the switch and the magnet is: less than or equal to: 90MM

3. The large relative motion speed between the switch and the magnet is 15M/S

4. The size of the magnetic steel is 200mm in length and 95mm in width,

5. 38.5mm, Double hole diameter: 8mm

CJK-1Z explosion-proof magnetic proximity switch and deceleration parking magnet\\

Instructions for using wire rope magnetic field source
This usage is paired with a steel wire rope magnetizer and a demagnetizer. First, select a location where the hoist wire rope swings less, such as under the drum, guide wheel, or pulley. Install the magnetic switch next to the wire rope so that the switch end face sensor is facing the wire rope, and the distance between the switch end face and the rope is less than 50mm. Then, use a wire rope magnetizer to magnetize the corresponding position on the wire rope at a fixed point. During the lifting process, when the magnetized section of the steel wire rope reaches the position of the magnetic switch, the switch will activate and send signals for deceleration and other positions. Its application principle is similar to that of a tape recorder, which records the position signal on a steel wire rope, and during operation, the magnetic switch detects the recording point and sends out the position signal.

Bidirectional rope switch TKLSA-S2-5Y
Pulse switch J8200-S10P/18 proximity switch
NI35-CP40-FZ3X2 proximity switch
Proximity switch E2G-M30KN18-WS-B
Proximity switch KJ210-DA
Proximity switch LDEE80-3NK-F
Proximity switch LW15-4PKH-F
Proximity switch LW15-3PH-F
Proximity switch LDD60-3
Proximity switch LDD60-2K-C AC380V
Proximity switch LW15-2H-G
Deviation switch DQK-10-45
Deviation switch DQK-12-30
Proximity switch LS1-2K-G

CJK-1Z, CJK-2Z, CJK-3Z, CJK-4Z, CJK-4Z, HRCX20, HRCYJJ intrinsically safe explosion-proof magnetic switches for mining use