Plastic industry pipe shavings free cutting machine

NegotiableUpdate on 01/12

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The shavings free cutting machine for plastic industry pipes is mainly used in conjunction with plastic extruders for automatic production lines of various plastic products such as PVC, PE, PC pipes, and special-shaped materials. Adopting imported frequency conversion and PLC programming technology to control various mechanical transmissions. Both the motor and electrical components are protected, and there is a counterweight during cutting to make it smoother.

Product Details

Plastic industry pipe shavings free cutting machinestructural principle

The shaftless cutting machine is used for positioning and cutting pipes. During the cutting process, the frame can move along the extrusion direction and maintain synchronization with the pipe. There are towing devices at the front and rear ends of the machine, and different pipe diameters need to be adjusted. When the travel switch or encoder on the flipping frame sends a cutting signal, the clamping device of the machine is an aluminum Haff block. For pipes of different specifications, the corresponding Haff block should be replaced.

The cutting blades of the cutting device are synchronously driven in the direction by the cylinder, and the chip feed of the cutting blades is slowly pushed by the piston cylinder rod. The size of the cylinder thrust can be controlled by the pneumatic principle regulating valve. The position rotation of the cutting blades is completed by the motor device, and its rotation is supported and positioned by the main shaft bearing. The rotation center remains unchanged, so that the cutting pipe end face is flat, the size is standardized, and the feed depth can be adjusted freely.

Plastic industry pipe shavings free cutting machineCleaning and maintenance

1. Pay attention to environmental cleanliness: When the pipeline cutting machine is in operation, it is necessary to pay attention to the cleanliness of the surrounding environment and avoid entering a large amount of dust, dirt, and other debris, which may affect the normal use of the equipment.

2. Cleaning the cutting wheel: After each use, the cutting wheel fixed on the cutting machine should be cleaned in a timely manner. If there are oil stains, dust, and other debris on the cutting wheel, it can be cleaned with a general cleaning solution to avoid affecting the next use.

3. Regular cleaning of appearance: Regularly clean the appearance of the pipeline cutting machine to maintain its cleanliness and beauty, and avoid corrosion or damage during storage.

Cleaning and maintenance

1. Timely remove dust and debris from the cutting machine to prevent damage to the equipment.

2. Clean the machine tool guide rails and other parts that are prone to dust accumulation using pneumatic tools and wiping cloths. Attention must be paid to preventing electrical components from getting damp and contaminated.

3. Check for oil stains in the lubrication system for sedimentation, clean the valve body or oil passage to avoid valve jamming, sedimentation, and blockage

4. Clean the cooling system, check if the pump, water pipes, etc. are blocked, and promptly drain the residual water inside the water pipes after cleaning.

When conditions permit, the cutting machine can be thoroughly cleaned regularly to ensure the hygiene of the cutting equipment.