Plastic heating mixer, vertical plastic mixing dryer manufacturer, mixer heating can be customized with double-layer

articleName: Plastic Heating Blender

materialQuality: 430 stainless steel bucket with a thickness of 2MM, blade thickness of3MM

Heating power: The motor is 5.5KW, The heating power is 40KW high-temperature heating tube

windMachine: Huawei fan 1.1KW

holdQuantity: 2000KG

axleCheng: Imported bearings and three-layer sealing are used! Durable and wear-resistant!

Product features:

1. Mixing and drying synchronization: Due to the continuous flow of materials during the drying process, the heat penetration is uniform, the drying time is short, and it is not easy to solidify quickly;
2. The standard models in this series are: double-layer barrel design (single-layer design for economical models), with the inner layer made entirely of stainless steel material for material contact parts; The installation of intermediate layers and special insulation materials can achieve the effects of safety and energy conservation;
3. Specially designed high-frequency heater, fast heating, low power consumption, with a comprehensive drying cost of 25-30 yuan/ton per ton of material.
4. Specially designed dual tube moisture outlet can effectively discharge moisture, collect dust, and never pollute the working environment;
5. The barrel is equipped with an entrance door, making it easy and fast to change colors, materials, and clean;
6. After special modification, this series of models can be easily used for crystallization and drying of plastic powder and PET pellets;
7. Multiple models and large capacity, available for one-time loading: 0.5 tons, 1 ton, 1.5 tons, 2 tons, 3 tons and other spot goods for customers to choose from;
8. The drying and mixing function is two in one. When drying is not needed, simply turn off the 'heating switch' and 'fan switch', and this series of models can be used for plastic mixing and homogenization purposes, with one machine for two purposes

Applicable customers:

Mainly suitable for drying and mixing of crushed materials, plastic sheets, plastic pellets, shaped materials, and crushed materials.

Difference from ordinary dryer:

1. The hot air of traditional dryers enters from one side of the lower part of the barrel. As the material is stationary, the hot air is difficult to penetrate, resulting in a phenomenon of upper heat and lower temperature inside the dryer. Sometimes, material clumping occurs due to local overheating, causing blockage and making it more difficult for the hot air to enter other areas, thus failing to achieve the expected drying effect. The design of this machine is a two-stage spiral conveyor. The first stage sends the raw materials into the barrel, and the second stage continuously lifts the raw materials to the upper part of the barrel to scatter them in an umbrella shape. The hot air is blown out from the center of the lower part of the barrel to the surrounding areas, smoothly penetrating upwards from the gap between the moving raw materials. This is the dynamic situation of the raw materials
Get sufficient heating below.

2. This series of models has the characteristic of working more: due to the continuous rolling of materials up and down in the bucket, hot air is not lifted and transported from the center, thus achieving the effect of mixing and drying. If drying is not required, this series of machines
Type can be set as a separate mixing working mode;

3. The barrel body is designed as a double-layer barrel body (with stainless steel inner layer), and the middle layer is insulated with special insulation material, thus achieving the effect of insulation and energy saving;

4. The inner barrel body, spiral slurry, main shaft, barrel, bracket, hopper, discharge port, etc. are all made of stainless steel material;