3000KG plastic sheet mixer, mixing machine, plastic large conveying pipe, large spindle

article Name:3000KG plastic sheet mixer

material Quality:The thickness of the 430 stainless steel mirror 8K bucket body is 1.5mm, which is easy to clean and does not rust or fall off. The blade thickness is 3MM

electricity machine5.5KW Four pole Three phase 380V50HZ

change fast350 revolutions per minute

electricity implement:chintelectricalEquipped with a 0-60 minute timer imported from Taiwan Any setting!

change fast350 revolutions per minute!

Mixing time: Timing starts from the moment the entire bucket is filled, usually withinStir evenly within 8-10 minutes!

The difference between Yitong mixer and its peers:

1. In terms of materials: We use plastic special sheet 430 mirror 8K stainless steel, which is smooth, easy to clean, and rust free.
2. Spindle material: We use 201 stainless steel seamless steel pipe, which is wear-resistant, has good toughness, and has a long service life.
3. Viewing method inside the bucket: Both the bucket body and the cone are equipped with rectangular feeding windows, which are all stamped and formed to look beautiful! The material is very clear!
4. Material release method: Adopting a knife type material release, convenient, fast and leak free
5. Electrical appliances and motors: All copper motors are used, with three layers of thermal relay protection to ensure that the motor is not easily burned out due to overload.
6. The bearing adopts three sealing devices, and powder cannot enter at all. The manufacturer promises a two-year warranty for the bearing!

1Plastic vertical mixerWorking principle:

YitongThe plastic mixer is mainly composed of a feeding hopper, a feeding screw, a material lifting screw, a cylinder, a discharge valve, and other structures. The working principle of screw mixing is adopted. After starting the machine, the mixed material enters the vertical screw conveyor through the feeding hopper of the internal screw mixer and the feeding screw. The mixed material is lifted upward by the screw to reach the top of the bucket, and then thrown in an umbrella shape, falling along the circumference of the mixing cylinder. The material thrown down from the top falls into the gap at the bottom of the mixer and automatically enters the vertical screw conveyor, where the material is lifted and mixed again. The raw materials are stirred up and down in the bucket, and a large amount of raw materials can be evenly mixed in a short period of time.

IImixeradvantage:

1. Automatic operation timing, overload protection, feeding limit alarm and other functions;

2. And it has the advantages of small land occupation, large capacity, low power consumption, labor saving, convenient operation, fast and uniform mixing, etc;

3. It can be widely used for plastic sheet materials, crushed materials, powder materials, plastic particles, new and old plastic materials, as well as adding colorants and stirring evenly.

4. Applicable customers: industries such as pellet cutting, plastic material manufacturing, masterbatch manufacturing, plastic modification, recycled material recycling and processing, and large-scale injection molding.

IIIPlastic vertical mixerAdvantages:

1. Easy to operate and maintain; (Vertical design)

2. Ready to use 1-12 ton models for customers: (Capacity optional)

3. Made of stainless steel, easy to clean and rust free; (Easy to clean)

4. Fast mixing speed, ensuring consistency of each batch of materials; (Mix evenly)

5. It has the advantages of small investment, fast return on investment, less land occupation, labor saving, and high efficiency; (Cost saving)

6. Customization can be made according to the height requirements of the customer's workshop; (Can be customized)

7. The material used for production can be chosen by the customer themselves; (Materials are optional)