PVC industrial particle automatic feeding machine

NegotiableUpdate on 01/12

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The automatic feeding machine for pvc industrial particles belongs to the model of wet granulation. The upper part of the disc is usually equipped with a spray device, which is used to wet materials and increase the viscosity of materials. Therefore, in order to ensure good adhesion of materials, the spray device should be checked frequently to ensure that the waterways in the spray device are unblocked.

Product Details

PVC industrial particle automatic feeding machineFeatures:

1. High precision; The automatic feeding machine adopts high-precision sensors and control system, which can control the feeding amount of materials, ensuring the accuracy and stability of the product.

2. Intelligence;

The automatic feeding machine is equipped with an intelligent control system, which can automatically complete material feeding, storage, blending and other operations according to different requirements, improving production efficiency.

3. Reliability;

The materials and components used in the automatic feeding machine are manufactured through strict processes, with high reliability and durability, reducing maintenance and upkeep costs.

PVC industrial particle automatic feeding machineParking and Handling

After the feeding machine stops working, the feeding machine and feeding area should be cleaned in a timely manner to avoid hygiene problems caused by accumulated materials.

2. Record the quantity and quality of the added materials, and promptly report to relevant departments and management personnel.

When the feeding machine malfunctions or is in an abnormal state, it should be stopped immediately, and the fault should be promptly eliminated or professional personnel should be contacted for handling.

4. After parking, turn off the power switch of the feeder and clean the feeder and feeding area to ensure that the feeder is turned off.

Maintenance and upkeep:

1. Cleaning: The feeder needs to be cleaned every day after operation, wiping the inside and outside of the feeder clean, especially the contact surface, control panel, inlet and outlet of the machine.

2. Lubrication: It is best to lubricate the feeding machine before maintenance, using lubricating oil, Vaseline and other products for lubrication. At the same time, the oil level at the lubrication point should be checked.

3. Inspection: Regularly check whether the feeding machine is operating normally, and if any abnormal situations are found, they should be resolved in a timely manner. Especially check whether there is any looseness in the transmission parts of the feeding machine, whether the bolts are loose, whether the belt is worn, etc. If there are any problems, they should be solved in a timely manner.

4. Replacement: Various components of the feeder also need to be replaced regularly, such as belts, hubs, bearings, gears, etc. If any parts are found to be worn, aged, or malfunctioning, they should be replaced in a timely manner.