PET bottle label removal, sorting, crushing, cleaning, dehydration, drying, and recycling production line (all 304 stainless steel except for the crusher)

PET bottle label removal, sorting, crushing, cleaning, dehydration, drying, and recycling production line (all 304 stainless steel except for the crusher)
(Finished product output: 500kg/h, first grade net sheet, PVC content<0.02%)

1、 Main technical parameters:

1. 1 detachment machine
Main motor power: 11kw
Rotor diameter: Φ 500mm
Rotor speed: 590rpm
Pump power: 5.5kw
Feeding port size (W * H): 700 * 460mm
Machine effective length: 3000mm
Machine dimensions (L * W * H): 3500 * 1100 * 2850mm
Deviation rate:>95%

2. 1 conveyor belt
Effective conveying length: 4500mm
Motor power: 1.5kw
Belt width: 600mm
Note: The material is transported to the label removal machine through a belt conveyor.

3. PC800 crusher (with water) 1 set
Motor power: 30kw
Studio size: 800 × 560mm
Rotation diameter: Φ 560mm
Rotor speed: 500rpm
Number of knives: 8
Number of knives: 4
Blade material: W18Cr4V (tungsten high-speed steel)
Auxiliary motor: 0.37kw, 6-stage motor, can electrically open the crushing chamber for easy tool replacement, maintenance and repair of equipment;
Forced material pressing motor: 3kw, forced material pressing prevents bottle rebound, which helps to increase the output of the crusher;
Spray pipe diameter: Φ 32mm
Equipped with emergency overload prevention switch
Note: The material is broken into small fragments by cutting with a moving knife and a fixed knife, and the material is initially cleaned by friction generated by the action of water spraying.
Crushing bin: Made of high hardness steel formwork, processed, finely ground, and assembled. It has the characteristics of large thickness, high strength, strong wear resistance, no pollution, and long service life. The assembled crushing bin is very convenient for disassembly, maintenance, and repair.
Cutting tool: The moving blade adopts the "V" cutting technology, which cuts the material evenly, reduces energy consumption and noise, and the loading and unloading of the blade is very convenient; Using W18Cr4V material, it has the characteristics of high strength, good toughness, and not easy to break, and can ensure good cutting edge during operation. It is very convenient for disassembly, repair, and maintenance.
Spindle: Made of special materials, it is balanced dynamically and statically, and has the characteristics of good toughness, low deformation during operation, and stable working state. The moving blade adopts a "V" shaped installation method, which enables the rotating blade to cut materials evenly throughout the entire work, reduces energy consumption, and lowers noise, making it very convenient to install and remove blades.
Drive pulleys: All pulleys on machines are connected to the drive shaft and pulleys through couplings, which have the characteristics of balanced operation, precise fit, easy disassembly and assembly, and simple maintenance.
Screen: The material of the crusher screen plate is processed from high-strength steel. The sieve plate has high strength and long service life. The installation form of the sieve plate on the machine is very simple, easy to replace, and there are many different mesh screens available for customers to choose from.

4. 3 friction cleaning machines
$26000 * 3 Motor power: 18.5kw
Speed: 500rpm
Effective length: 4000mm
Mesh hole diameter: Φ 3mm, mesh made of stainless steel
Spray pipe: Φ 32mm
Drainage outlet: Φ 32mm, with sewage discharge function
Note: The high-speed operation of the paddle blades ensures sufficient friction of the material, and the dirt is washed away with clean water. Configure an overflow tank to collect the discharged debris.
Material: The parts in contact with the material are made of stainless steel

5. 1 rinsing tank
Effective length: 6000mm, width 1000mm, total height 1600
Motor power: 2.2kw * 5
Equipped with an overflow tank to collect labels and bottle caps discharged from the rinsing tank.
Stainless steel mesh is installed at the bottom for easy filtering of impurities
Note: The dirt on the surface of the bottle, labels, and bottle caps should be thoroughly precipitated, floated, and separated through the cleaning of the screw.
Material: The parts in contact with the material are made of stainless steel

6. 1 spiral feeding machine
Motor power: 7.5kw
Spiral diameter: Φ 280mm
Screw speed: 75rpm
Note: The material is fed into the friction cleaning machine through spiral lifting.
Material: The parts in contact with the material are made of stainless steel

7. 1 centrifugal dewatering machine
Motor power: 22kw
Rotor diameter: Φ 400mm
Rotor speed: 1270rpm
Pushing motor: 1.1kw
Material: The parts in contact with the material are made of stainless steel.
The moisture on the surface of the bottle is shaken dry by centrifugal force and sent to the air duct drying system.

8. 3 electrical control boxes
Total price $14000 1. Crusher control box
2. Centrifugal spin dryer control box
3. Complete set of equipment electrical control box
Note: The electrical components of the above control box are all Siemens or Schneider

Finished product, PET net sheet