Online monitoring system for CEMS flue gas emissions of coal-fired and gas-fired boilers

NegotiableUpdate on 02/27

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

CEMS continuous online monitoring system for flue gas: This system (CEMS) adopts the measurement principle of extraction condensation method. Can be contacted for automatic monitoring of smoke and dust SO2、NOX、CO2、CO、O2、 Changes in humidity, temperature, pressure, flow rate, etc., and timely and accurate monitoring data are provided to enterprises and government environmental protection departments through the pollution source online monitoring system platform. Our store specializes in online monitoring of flue gas CEMS, water quality, VOCs, industrial process gas analysis, ammonia escape gas analysis, other gas detection instrument accessories, and data collection and analysis.

Product Details

CEMS continuous online monitoring system for flue gas：Our store specializes in smoke and gasCEMSOnline monitoring, water quality online monitoring,VOCsOnline monitoring, industrial process gas analysis, ammonia escape gas online analysis, other gas detection instrument accessories, data collection and analysisWelcome to call for inquiry and comparison.

1、 Product Overview

This system（CEMS）The principle of measurement is based on the extraction condensation method. Can be contacted for automatic monitoring of smoke and dustSO2TheNOXTheCO2TheCOTheO2Changes in humidity, temperature, pressure, flow rate, etc., and timely and accurate monitoring data are provided to enterprises and government environmental protection departments through the pollution source online monitoring system platform. The host of this system is a self-developed gas analyzer, flue gas analysis system, high-temperature sampling probe, temperature pressure flow integrated machine, dust detector, industrial computer, heat tracing pipeline, etc. that use ultraviolet differential method.

SO2:0-100-5000mg/Nm3(adjustable)

NOX:0-100-5000mg/Nm3(adjustable)

Particulate matter:0-100-1000mg/Nm3(adjustable)

CO：0-3000ppm(adjustable)

CO2:0-99%(adjustable)

Oxygen:0-25%(Adjustable)

2、 System composition

1. Smoke component analysis system: Smoke analyzer.

2. Smoke and dust monitoring subsystem: smoke and dust monitoring device.

3. Smoke parameter monitoring subsystem: Pitot tube flowmeter, temperature and pressure measuring instrument, humidity measuring instrument.

4. Data Collection and Upload Subsystem: Industrial Control Computer PLC、 Data acquisition instrument.

5. Extraction sampling and preprocessing system.

6. Calibration system.

●Temperature: -20 ℃~45 ℃

Humidity: ≤ 90%

Atmospheric pressure: 86-106Kpa

● Smoke temperature:<300 ℃<>

Power supply voltage: AC 220V ± 10%, frequency 50Hz

Grounding resistance: ＜ 4 Ω

Attention	The analysis cabinet of this system is designed for non rain protection and must be placed indoors.
	The installation location should avoid heavy load cables, vibration, and strong electromagnetic interference as much as possible, avoid contact with highly corrosive materials, and ensure good heat dissipation.

Application areas: Petroleum and petrochemical plants, thermal power plants, cement plants, steel plants, etcLarge industrial and mining enterprises with high quantity and precision, paper mills, and waste incinerationBurning factories, food factories, various types of coal-fired, oil fired, and gas-fired boilers, etc

CEMS continuous online monitoring system for flue gasWelcome to call!