Multi functional ternary high-speed plastic mixer

Multi functional ternary high-speed plastic mixer 1. Four wheel upright design, small size, easy to move. $r $n 2. Equipped with a cycloidal pinwheel reduction motor, it has low noise and durability. $r $n 3. Complete uniform mixing in a short period of time, with low energy consumption and high efficiency. $r $n 4. The lid and bottom of the barrel are stamped and formed with precision, making it more durable.

1. Four wheel upright design, small size, easy to move.

2. Equipped with a cycloidal pinwheel reduction motor, it has low noise and durability.

3. Complete uniform mixing in a short period of time, with low energy consumption and high efficiency.

4. The lid and bottom of the barrel are stamped and formed with precision, making them more durable.

5. The timer can select the mixing time between 0-30 minutes.

6. The all stainless steel blade has a scientific and reasonable structure, which can fully stir the raw materials during operation and reduce the load to a small level, saving time and electricity;

7. Made of high-quality stainless steel material, with high strength and easy cleaning.

8. GMP design concept, high sealing device, heating or cooling jacket, conical quick discharge valve, each of which has been tested by numerous users, making you feel more at ease when using VSM.

9. Standardized mixing drive box to ensure stable operation and low maintenance costs.

1. Before use, a test run of the high-speed mixer should be conducted. Before the test run, the tightness of all connecting components and the integrity of the electrical equipment should be checked. Then, the main power switch should be closed and the power should be turned on to perform the test run.

2. Press and hold the safety protection switch with your hand, then press the green start switch. Pay attention to the direction of the motor rotation (clockwise rotation). If the direction is reversed, press the red switch to stop the machine and turn off the power. Swap the wiring positions of any two phase wires.

3. Air freight to trial machine test. The high-speed mixer can only be put into production if no abnormal noise, high temperature of the bearing gear, or temperature rise of the reducer are found.

3. After confirming the correct direction of the high-speed mixer motor, it can be put into production normally. Please set the mixing time according to the required mixing time for different materials (the timer can be adjusted from 0 to 30 minutes) before production use.

4. During use, if it is necessary to scrape the material on the inner bucket wall of the high-speed mixer, wooden or plastic tools should be used, and hands should not be used to avoid hand injury accidents.

5. If vibration or abnormal noise is found during use, the high-speed mixer should be immediately shut down for a comprehensive inspection.

6. Do not use excessive load. Generally, the load of the high-speed mixer motor is used to measure the overload current of a 380V motor when mixing plastic, and it is considered normal to not exceed the rated current of the motor. If the load is exceeded, the mixing capacity should be reduced.

7. Management personnel must be familiar with the technical performance, internal structure, control system, and operating principles of high-speed mixers. During operation, it is not allowed to leave the work site to prevent damage to components due to malfunctions and ensure safety production as a prerequisite.

1. Regular cleaning: After each use, the internal and external surfaces of the mixer should be cleaned to remove impurities and residues. Ensure that the ventilation holes and inlet/outlet ports of the machine are unobstructed.

2. Regular lubrication: According to the instructions in the operation manual, regularly lubricate the bearings and transmission components of the mixer. Use appropriate lubricants and ensure that the lubricated areas are adequately lubricated.

3. Check the transmission device: Regularly inspect the transmission device of the mixer, including the reducer, belt, chain and other components, to ensure that the transmission system is running normally without noise and wear.

4. Check the electrical system: Regularly inspect the electrical system of the mixer, including components such as cables, switches, and motors. Ensure reliable electrical connections without damage or looseness.

5. Cleaning the filter: Regularly clean and replace the filter of the mixer to ensure that impurities and particles do not affect the mixing effect. According to usage, the filter screen can be replaced regularly.

6. Regular equipment inspection: Regularly inspect various components of the mixer, including the mixer, discharge port, and auxiliary equipment. Ensure that there are no cracks, deformations, or looseness.

7. Pay attention to safe operation: When using the mixer, follow the safety regulations in the operation manual to ensure the personal safety of the operators. Regularly inspect safety devices and warning signs to prevent accidents from occurring.

8. Regular maintenance: Develop a regular maintenance plan based on the frequency of use and working conditions of the mixer, and carry out maintenance and upkeep according to the plan. Regularly replace vulnerable and aging parts to ensure the normal operation of the machine.