Multi functional industrial automatic magnetic separation equipment

NegotiableUpdate on 01/12

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Multi functional industrial automatic magnetic separation equipment is used in fields such as food, chemical, plastic, mineral, metal, and resource recycling stations. It has the characteristics of high magnetic field gradient, compact design, reasonable structure, easy operation, strong practicality, and wide applicability.

Product Details

　　Multi functional industrial automatic magnetic separation equipmentFeatures:

1. According to the form of impurities and oil content in the coolant, rubber roller type magnetic separators and comb tooth type magnetic separators can be selected

2. Rubber roller type magnetic separator can be selected from motor built-in type and external type according to the specific situation on site

3. In order to facilitate the complete removal of impurities adsorbed on the surface of the magnetic separator, the internal magnet of the rubber roller type magnetic separator can be designed with a structure where the magnetic force gradually weakens, with only the outer cylinder rotating, reducing power consumption and significantly saving energy.

4. The surface of the strong magnetic comb type magnetic separator can be equipped with a scraper chip removal mechanism and a hydraulic flushing device to eliminate impurities and solve the problem of debris deposition; To better drain the moisture, the comb shaped magnetic separator can also be equipped with a liquid level control switch or a time relay to make the deceleration motor run intermittently

5. For the convenience of customers using the magnetic separator, the water inlet can be designed as upper inlet or rear inlet, and the water outlet can be designed as left, right, and bottom outlet

6. Single machine traffic increases from 25 liters/minute to 4500 liters/minute

7. The voltage of the deceleration motor is three-phase 380 or 220 volts, and the deceleration motor can be placed on either side according to user requirements

8. The magnetic separator adopts two methods: PLC automatic control and manual control. The magnet can be made of ferrite, neodymium iron boron or aluminum nickel cobalt according to customer requirements. The shell material can be made of carbon steel or stainless steel depending on the specific situation.

The magnetic separator, as a machine tool auxiliary equipment, has not received the attention it deserves like machine tools, which is also the responsibility of machine tool auxiliary equipment manufacturers.

　　Multi functional industrial automatic magnetic separation equipmentmaintain:

1. Clean the inside and outside of the magnetic separator, ensuring that there are no oil stains on the sliding surfaces, screws, racks, gearboxes, oil holes, etc., and that there is no oil or gas leakage in any part. The chips, debris, and dirt around the equipment should be cleaned thoroughly.

2. Tools, accessories, and workpieces (products) should be placed neatly, and pipelines and lines should be organized.

3. Adhere to safety operating procedures, do not overload the use of magnetic separators, ensure that the safety protection devices of the equipment are complete and reliable, and promptly eliminate unsafe factors.

4. Good lubrication, timely refueling or oil change, continuous oiling, no dry friction phenomenon, normal oil pressure, bright oil level, smooth oil circuit, oil quality meets requirements, and the oil gun, oil cup, and oil felt are clean.

Attention: When the magnetic separator is not working for a long time, the box should be cleaned to prevent impurities from accumulating and freezing. If the chain gap is too large, the tightness should be adjusted in a timely manner and the chain should be oiled regularly. Impurities should not increase rapidly, otherwise it will cause the motor to lock up. The attachments on the surface of the rubber stick and magnetic bucket should be dealt with in a timely manner.