Micro hole leak detection machine manufacturer

1、 Name and model of the machine

HDB-2 Electronics for Blowing, Filling, Sealing and Drainage ProductsMicro hole leak detection machine.

2、 Machine functions and basic actions

HDB-2 ElectronicsMicro hole leak detection machineIt is a non-destructive inspection machine that applies high frequency and high pressure to sealed row products filled with liquid medicine, and automatically eliminates products with leakage points.

The blown, filled and sealed products are output by the BFS filling machine and enter the automatic feeding machine. The products are automatically divided and transported to the inspection conveyor belt, and then immediately pass through the CH1 and CH2 high-voltage electrodes for alternating inspection. Unqualified products are automatically removed by the removal device, and qualified products are discharged and sent to the next process.

The feeding and discharging direction of the machine is from left to right facing the operating surface of the machine.

The design and manufacture of this HDB-2 electronic micro hole leak detection machine equipment meet the requirements of China's 2010 version GMP and European GMP standards.

HDB-2 electronic micro hole leak detector

3、 Machine material

Product contact part: ▲ Stainless steel 304

▲ Nylon

▲ Polyethylene resin material (PP)

Internal rack: ▲ High quality A3 steel plate, angle steel and coated treatment

Exterior: ▲ Stainless Steel 304

4、 Structural characteristics

This HDB-2 electronic microporous leak detector is a non drip proof structure;

In the production process, if the product is damaged, the machine should be quickly stopped and the medicine should be wiped clean with a dry cloth.

5、 Electrical system

(1) The operating circuit of HDB-2 electronic micro hole leak detector adopts low voltage 24VDC.

(2) The electrical box and wiring comply with IEC principles.

6、 Safety device

(1) Emergency stop device

(2) Install safety doors in the leak detection machine inspection room

(3) Ozone decomposition blower

(4) Alarm device

7、 Working requirements for leak detection machine

(1) Power supply: 380VAC

(2) Power consumption: 1KVA

(3) Grounding: Type 3 grounding (grounding impedance below 100 Ω)

(4) Gas source: above 0.5MPa.

(5) Environment: Room temperature: 20 ± 10 ℃; Humidity: 20% -80% RH.

The main products are infrared high-temperature radiation thermometers, intelligent digital display regulators, intelligent temperature transmitters, etc. Widely used in industries such as metallurgy, steel, ceramics, non-ferrous metals, machinery, pharmaceuticals, and healthcare, with users spread across the country.