Manufacturer of metal alloy preparation equipment for horizontal vacuum melting furnace

1. Vacuum melting furnace heats or cools according to the process Equipment purpose

This product is designed with a horizontal front door structure, featuring a novel and aesthetically pleasing appearance. Mainly used by colleges, research institutions, and production enterprises for melting and processing metal materials (such as stainless steel, nickel based alloys, copper, alloy steel, nickel cobalt alloys, rare earth neodymium iron curium, etc.) under vacuum or protective atmosphere conditions. It can also be used for vacuum refining of alloy steel.

2·Vacuum melting furnace heats or cools according to the process Product Features

1. Fast melting speed, with the installation of insulation sleeves, the temperature can reach 2000 ℃

2. It can be equipped with a program to raise or lower the temperature, and the heating or cooling curve can be set according to your process requirements. The equipment will automatically heat or cool according to this process

3. Equipped with a pouring device, the melted sample can be poured into a pre prepared ingot mold to create the desired sample shape

4. Can be melted under various atmospheric conditions: air state, protective atmosphere conditions, and high vacuum conditions. Purchase one equipment to achieve multiple functions; Save your costs to a certain extent.

5. Equipped with touch screen control, it can intuitively observe the operation process of each component and display the operating status of each component.

6. Equipped with a secondary feeding device, other alloy trace elements (small pieces, mainly granular materials) can be added during the melting process

7. The furnace body is made of all stainless steel structure and equipped with water cooling to ensure that the shell temperature is below 35 ℃, protecting your personal safety

8. Control mode: touch screen+PLC

3. Main technical parameters

3.1 Equipment induction power supply power: 25KW

3.2 Power Supply Voltage: 380V, 3-phase, 50Hz

3.3 Operating temperature: 1800 ℃, equipped with an infrared thermometer

3.4 Configure instrument temperature measurement, which can manually adjust power in real-time,

3.5 Crucible capacity: 1000-2000g (in liquid steel)

3.6 Coil configuration: 500g 1 piece, 1000g 1 piece, 2000g 1 piece

3.7 Ultimate vacuum degree: 6.67 × 10E-3Pa

3.8 Configure a secondary feeding device to achieve secondary addition of alloy materials

3.9 Configure manual tamping rod to achieve mixing and tamping of materials

3.10 The vacuum chamber is equipped with a lighting window, which can clearly observe the internal working conditions.

3.11 Protection atmosphere: Nitrogen and argon gas ≤ 0.03MPa chambers are equipped with safety overpressure relief valves to prevent overpressure inside the furnace.

3.12 Dimensions: 1550 × 1150 × 1700mm (L × W × H)

3.13 Total weight of equipment: approximately 700Kg

3.14 Control mode: touch screen+PLC