-
E-mail
18006168180@elmvac.cn
-
Phone
15852642786
-
Address
No. 3001 Cheng Road, West Shiqiao Town, Lingang New City, Jiangyin City, Jiangsu Province
Product Categories
Jiangyin Elm Vacuum Equipment Co., Ltd
Jiangsu Water Ring Pump Supplier
NegotiableUpdate on 03/02
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
Overview: The 2BV series water ring vacuum pump is suitable for extracting gases and water vapor, with a suction pressure of up to 33mbar absolute pressure (97% vacuum degree). When the water ring vacuum pump operates for a long time under suction pressure close to the ultimate vacuum (saturated vapor pressure of the working fluid), a cavitation protection pipe should be connected to protect the pump. When used as a compressor, its pressure Z is as high as 0.26MPa (absolute pressure). As a new generation of energy-saving products, the 2BV series water ring vacuum pump will fully replace the SK, 2SK series water ring vacuum pumps and W, WY, WL series reciprocating vacuum pumps with excellent performance and numerous advantages
Product Details
2BV2 Ex, 2BV6 seriesWater ring vacuum pump/Compressors are mainly used to extract explosive gases and operate in various flammable and explosive environments. Their performance parameters are the same as those of the 2BV2 and 2BV5 series.
2BV seriesStainless steel vacuum pumpIt can be used in various environments with high corrosion resistance requirements and high cleanliness requirements.
According to the operating conditions, all overcurrent components of the 2BV series stainless steel vacuum pump, including impeller, disc, pump cover, and pump body materials, can be selected
SUS304（0Cr18Ni9)
SUS316（0Cr17Ni12Mo2）
SUS316L（00Cr17Ni14Mo2）
Various types of stainless steel materials, pump shaft materials: 2Cr13, SUS304 or SUS316L
The mechanical seal adopts imported products, and the sealing components can be made of fluororubber or polytetrafluoroethylene
Key Features:
The direct connection design of the motor saves space, is easy to install, and is easy to maintain.
All use imported mechanical seals from abroad as standard configuration.
All are equipped with cavitation protection pipe interfaces. If working under extreme pressure, opening the cavitation protection pipe interface (or connecting it to the separator) can eliminate cavitation sound and protect the pump while ensuring maximum suction effect.
The 2BV series comes standard with stainless steel impellers, while the 2BV2 series is equipped with stainless steel discs/impellers. High strength, durability, and improved corrosion resistance of the pump. If all overcurrent components are made of stainless steel, they can work in more demanding environments.
*The flexible exhaust port design ensures that there is no over compression, ensuring the efficiency of 2BV within its performance range.
All Y2 series motors are used, with protection levels of IP54 and IP55 (usually IP44), and insulation level of F (usually B)
All use NTN or NSK imported bearings
2BV series water ring vacuum pumpAll flexible seals can be made of polytetrafluoroethylene, which can greatly extend the service life of vacuum pumps under harsh working conditions.
