Industrial parallel automatic extrusion equipment

NegotiableUpdate on 01/22

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Industrial parallel automatic extrusion equipment is mainly engaged in the research, development, and manufacturing of twin-screw extruders, twin-screw extruder barrels, SHJ-35 twin-screw extruders, co directional parallel twin-screw extruders, and spare parts for twin-screw extruder manufacturers

Product Details

　　Composition of industrial parallel automatic extrusion equipment

1. The extrusion system, consisting of a barrel, screw, and hopper, is the core working part of the extruder.

2. The transmission system consists of a motor, a speed control device, and a transmission device. The function is to provide the required speed and torque to the screw.

3. The heating and cooling system consists of temperature control equipment. The function is to heat and cool the barrel to ensure that the extrusion system is formed within the temperature range required by the process.

4. The control system mainly consists of instruments, electrical appliances, and actuators. The function is to regulate and control the barrel temperature, head pressure, and screw speed.

Industrial parallel automatic extrusion equipmentDaily maintenance knowledge
1. After using the machine for a period of time, a comprehensive inspection should be conducted to check the tightness of all screws.
2. If there is a power interruption in production, the main drive and heating will stop. When power is restored, each section of the material barrel must be reheated to the specified temperature and kept warm for a period of time before the extruder can be started.
3. After 500 hours of use of the extruder, there will be iron filings or other impurities from gear grinding in the gearbox, so the gears should be cleaned and the gearbox lubricating oil should be replaced.
4. If the full rotation of the instrument and pointer is found, check whether the contact of the thermocouple and other lines is good.
5. No debris is allowed inside the material, and it is strictly prohibited for hard objects such as metal and sand to enter the hopper and extruder.
6. When opening the material cylinder cover or exhaust cover, take strict precautions to prevent foreign objects from falling into the main engine.
7. There should be sufficient preheating and heating time, and the manual turning should be light and agile before driving. After reaching the set process temperature, it should be kept at a constant temperature for 2 hours.
8. The screw is only allowed to start at low speed and idle for no more than 3 minutes.