How much does the wall mounted intelligent speed monitoring device cost

ZS-B1 Intelligent Speed Monitoring Instrument

1. Introduction

ZS-B1 Intelligent Speed Monitoring InstrumentThe application of microprocessor chips for signal processing ensures accurate measurement, stable performance, and the ability to expand functions according to user needs. This monitoring device has functions such as speed measurement, two-level alarm, overspeed protection, analog voltage and current output, sensor fault monitoring, alarm query, self check, etc. Suitable for monitoring and protecting rotating machinery in power, petroleum, chemical and other units. The number of teeth and alarm settings can be set on site. There are three types of casings to choose from, with dimensions of A: 160 (width) x 80 (height) x 215 (depth) mm, B: 160 (width) x 80 (height) x 80 (depth) mm, and C: a frame combination type, as shown in the structural parameters of the 8200 series turbine monitoring system.

2. Main functions

● It has a speed measurement display function, with a speed measurement of 99999 revolutions per minute and a five digit digital display.

● Alarm function: When the measured speed exceeds any alarm set value, the corresponding alarm indicator light on the front panel will light up, and a switch signal will be output on the rear panel to protect the monitored equipment.

Equipped with voltage and current output interfaces, it can be connected to devices such as computers.

The alarm value, number of teeth, and time can be set through the front panel buttons.

● It has a storage function for overspeed events for future reference.

● It has an indication function for sensor or input circuit faults.

● Equipped with self checking function

3. Technical Parameters

Measurement range: 1 to 99999 revolutions per minute,

Accuracy: ± 0.02% × n (n is the displayed value r/min of the instrument) ± 1 word

● Input signal: sine wave or pulse input, input voltage effective value 0.3-20V

● Alarm output: There are two red LED indicator lights on the front panel, alarm 1 and alarm 2. There are two relay normally closed alarm contacts on the rear panel, and the relay output contact current is AC220V/3A, DC28V/3A.

Output interface: Output proportional to the full-scale range of the speed monitoring instrument (0-3500r/min)

Current: 4-20mA, load ≤ 500 Ω

Voltage: 1-5VDC, load ≥ 5K Ω

● Work environment:

A. Temperature: 0~+60 ℃

B. Relative humidity: ≤ 80%

C. There is no strong magnetic field interference around

D. There is no corrosive gas present around

● Working power supply: AC220V ± 10% 50Hz ± 5% Power consumption ≤ 20W

Installation method: disc type

● Overall dimensions:

Type A: 160 (width) x 80 (height) x 215 (depth) mm

Type B: 160 (width) x 80 (height) x 80 (depth) mm

● Hole size: 151 (width) x 75 (height) mm

4. Selection Guide

ZS-B1—A □□—B□□—C□□—D□□—E□□

Range selection: A □□

0 1: 0-3000 revolutions per minute

0:0 to 3500 revolutions per minute

0 3: 0-4000 revolutions per minute

0 4: 0-4500 revolutions per minute (users can customize according to their needs)

Current output: B □□

0 1: 4～20mA

0 2: 0～10mA

Voltage output: 1-5V

Sensor selection: C □□

0 1: Reluctance sensor

0 2: Eddy current sensor (optional when zero speed is not required on site)

Alarm delay: D □□

0 1: 0.1 seconds

0 2: 1 second

0 3: 3 seconds

Number of teeth selection: E □□

0 1:48 teeth

0 2:60 teeth