How much does the domestic petroleum water and electricity analyzer cost

NegotiableUpdate on 02/02

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The petroleum electric demulsifier mainly uses electric demulsification technology for oil-water separation. The water in crude oil is usually suspended in the form of tiny water droplets in the oil, forming a stable emulsion. The instrument polarizes water droplets and generates internal frictional heat by applying non-uniform high-frequency pulsed strong electric fields, continuously overcoming the strength of the emulsion film. Water droplets gradually gather under the action of an electric field to form large droplets, accelerate sedimentation, and ultimately achieve oil-water separation. This method has the advantages of being fast, accurate, and free of secondary sampling errors, and is widely used in petroleum extraction and laboratory analysis.

Product Details

Petroleum electric dehydratorMain technical parameters

analysis scope：0～100%

analysis time：

●

Ordinary crude oil: ≤ 1 hour

●

Hot recovery emulsified heavy oil: ≤ 3 hours

analysis error：±1%

Measuring cylinder volumeUsually 800ml, but there are also other specifications such as 280ml

heating power：≤150W

Dehydration power consumption：≤15W

power supply：AC 220V±10%，50Hz

Dehydration steps

Pour the processed oil sample into a dehydration glass graduated cylinder, then insert the "heating dehydration internal electrode" into the dehydration glass graduated cylinder oil sample, turn on the "dehydration" and "heating" switches, and the heating and dehydration indicator lights will turn on, indicating that heating and dehydration are in progress. Slowly stir the oil sample with an internal electrode to facilitate uniform heating and rapid dehydration. Heat to an appropriate temperature so as not to cause the oil sample to boil violently and overflow. If the temperature is too high, immediately turn off the heating switch. When the free water settling no longer increases, turn off the "heating" and "dehydration" switches, and then remove the heating inner electrode.

Common faults and maintenance

Here are several possible fault phenomena and inspection and maintenance methods that may occur during the use of the instrument, listed as follows:

serial number	Fault phenomenon	Inspection steps	Repair and treatment
1	The heating and dehydration indicator lights are not on, and the ammeter has no indication.	① Check if the power cord plug and power socket are in good contact and have electricity; ② Check if the fuse is intact; ③ Check if there is voltage input to the primary of the transformer; ④ Check if there is voltage output from the secondary of the transformer.	Replace the fuse, inspect all plugs and sockets, or replace the transformer.
2	The heating indicator light is not on, and the internal electrode is not heating up.	① Check if the heating plug socket is in good condition; ② Check if the heating wire is burnt out.	Repair the heating plug socket or replace the internal electrode.
3	The heating indicator light is not on, and the internal electrode is heating up.	① Check if the heating switch indicator light has poor contact or is damaged.	Repair or replace the heating switch.
4	The dehydration indicator light is on, there is no high voltage output, and the ammeter has no indication.	① Check if the rectifier diode is damaged; ② Check if the transistor is damaged; ③ Check the ammeter; ④ Check the high-voltage package.	① Replace the diode; ② Replace the transistor; ③ Replace the ammeter; ④ Replace the high-voltage package
5	Poor dehydration effect.	① The inspection steps are the same4； ② Check if the high-voltage line is in good contact.

Petroleum electric dehydratorAs a key equipment in the petroleum industry, its technological progress is of great significance for improving oil production efficiency and management level. In the future, with the continuous innovation of technology and the sustained growth of market demand, the oil containing water and electricity analyzer will play an increasingly important role in the oil extraction and processing process, contributing to the sustainable development of the energy industry.