Handheld ammonia gas detector NH3 probe quotation

NegotiableUpdate on 03/07

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Adopting imported brand sensors and their * circuit design, industrial grade fast brushless air pump, mature fast core system, can timely capture hazardous gases and display gas concentration in a timely manner

Product Details

Equipment parameters

Detection method	pump-suction type
Measuring gases	ammonia
measurement range	0-100PPM/0-50PPM (range not listed optional)
Detection Principle	electrochemistry
Testing Unit	%VOL、%LEL、mg/m3、ppm、 Multiple units to choose from;
resolution	0.01PPM (depending on range)
precision	3%F.S
repetitiveness	1%F.S
display mode	2.5-inch dot matrix display screen
data recording	Up to 80000 records, can be set once/1s, once/10s, or once/60s
response time	30S
automatic diagnosis	Functions such as battery level/display/sensor/hardware failure
explosion-proof type	Inherent safety design
Weight	0.26kg
working conditions	0~90% RH atmospheric pressure 0.1MPA temperature: -20-50 degrees
size	135mm in length, 65mm in height, and 35mm in width
data recovery	Convenient and fast, one click factory reset
standard	GB 12358-2006、GB 3836.1-2010、GB 3836.4-2010
Factory accessories	Instruction manual, charger, aluminum packaging box, test report, warranty card, certificate of conformity

Feature Introduction

★Anti interference performance: Anti strong magnetic interference/Anti impurity gas interference

★ Multi level calibration: With automatic calibration function, low failure rate, stable and reliable, up to 6 levels of target point calibration function

★ Supports LCD bilingual display in both Chinese and English, easy to operate;

★ Imported sensors: high anti-interference and stability;

★ USB1.1 interface: can be connected to a computer to display storage date, gas name, concentration value;

★ High capacity size: can store 80000 pieces of data and connect to a computer for printing;

★ 2700mAh high-capacity lithium battery, with a continuous working time of more than 20 hours;

★ Intrinsic Safety Circuit Shell Design: The circuit is designed according to the requirements of intrinsic safety and meets national standards;

★ Built in high-performance air pump, stable flow rate, can be turned on or off;

Instructions for using gas detector:

Maintenance and Calibration: After the instrument is used, it should be regularly maintained, and the gas detector should be calibrated six months or a year later to prevent measurement errors

Determine the detection location: Before using the gas detector, it is necessary to determine the detection location and the type of gas being detected. At this time, corresponding protective measures can be taken according to different gases. If there are toxic gases in the environment, it is even more important to take self-protection measures