Fixed carbon monoxide gas alarm CO probe quotation

NegotiableUpdate on 03/07

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Real time monitoring of carbon monoxide gas By using imported industrial grade sensors and chips, real-time monitoring of carbon monoxide gas content can be achieved, with display and alarm functions. Easy to install, comes with a power adapter as a gift, ready to use upon arrival, comes with explosion-proof certificate, SIL2 certification, IS0 quality system certification, factory inspection report and other certificates

Product Details

gas detection	carbon monoxide	quantity Cheng	/0-1000PPM (More ranges can be consulted);
divide distinguish rate	1PPM	Detection Principle	electrochemistry
essence degree	≤±3F. S	display mode	320 * 240 high-definition color screen
response time	T90＜30S	recovery time	≤30S（T90-T10)
service life	Sensor 2-3 years	Detection method	diffusion
heavy again sex	≤±1 %F.S	succeed electricity device	Capacity 220VAC 3A/24VDC 3A
Wireless output Optional	433M (≤ 3 kilometers accessible)（定制） GPRS (unlimited distance)（定制） WIFI/zigbee/LORA（定制）	Wired output Optional	485+switch outputStandard configuration 4-20mA+RS485+Switch alarm output （定制） Choose one of the above options
Protection level	IP66	Explosion-proof rating	Explosion proof type: Exd Ⅱ CT6 Gb
ruler inch	20514092mm(L×W×H)	Probe material	Aluminum alloy, stainless steel (optional)
Installation method	Wall mounted, pole mounted, pipeline mounted	heavy quantity	1KG
Working Voltage	12－35VDC， Commonly used 12VDC, 24VDC	electrical interface	Wiring port size: internal thread M20*1.5（ G1/2 Internal thread G3/4 internal thread, 1/2NPT
Standard Accessories	Detector, manual, infrared remote control, manufacturer's factory inspection report	select match document	Explosion proof sound and light alarm, installation bracket, pipeline installation accessories, etc
working environment	Temperature: Catalytic combustion: -40~+70 ℃; Electrochemistry: -20~+50 ℃; PID：-20~+50℃； Infrared: -20~+50 ℃; Fluorescence method:-20~+50℃；Zirconia: -40 ℃~+700℃ Pressure: 86-110KpaZirconia: ≤0.6Mpa) Humidity: 15% RH~95% RH (no condensation)
Product power consumption	Electrochemical sensor: P ≤ 1.2W Infrared sensor: P ≤2.0W Conventional catalytic sensor ：P ≤ 2.6W Low power catalytic sensor ：P ≤ 1.5W Thermal conductivity sensor ：P ≤2.0W
execution standard	GB15311.1-2003； GB3836.1-2010； GB3836.2-2010； GB3836.4-2010；

Feature Overview

★ Fast Core System: Equipped with a 32-bit high-speed microprocessor and an Epson data processing system, it can quickly detect hazardous gases and warn of toxic gas leaks;

★ Multi level calibration: Industry intelligent multi-level calibration technology, multiple filtering technology, more accurate and faster feedback of on-site concentration values;

★ Alarm system: sound and light alarm;

★ Stability: After strict feeding screening process and the ingenuity of R&D personnel with more than ten years of industry experience, it is resistant to EMC and EMI interference;

★ Multi structure communication method: Supports 4-20mA and RS485 single or multiple simultaneous communication, wired and built-in wireless 433M/GPRS wireless multi-channel communication (optional);

★ Standard specifications: JJF 1363-2012, JJF 1368-2012, JJF 1421-2013, JJF 1364-2012; GB3836-2010,GB 12476.5-2013;

Instructions for using gas detector:

Maintenance and Calibration: After the instrument is used, it should be regularly maintained, and the gas detector should be calibrated six months or a year later to prevent measurement errors

Determine the detection location: Before using the gas detector, it is necessary to determine the detection location and the type of gas being detected. At this time, corresponding protective measures can be taken according to different gases. If there are toxic gases in the environment, it is even more important to take self-protection measures